SAFETY
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER
SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PROFESSIONALS.
The model number of this product may be found on the back of the unit; the serial number of the label affixed to the back of the unit.
You should note the model and serial numbers of this unit in the space provided. Retain this booklet as a permanent record of your purchase to aid in identification in the event of theft.
MODEL#
SERIAL#
INTRODUCTION
Your new appliance is carefully engineered product. Many times what appears to be a reason to call service, the problem may require nothing more than a simple adjustment you can easily make in your own home.
You will be charged for a service call while the appliance is in warranty if the problem is not caused by defective product workmanship or materials covered by this warranty.
To avoid a charge for an unnecessary service call, and before calling a serviceman, please refer to the troubleshooting section for situations that you can remedy. This section is included on pages 21 of this Owner’s Manual.
Your
You will obviously want to obtain the best possible wash. By reading and following the instructions in this booklet you will achieve excellent results.
Please, ensure that the instructions are followed. If you should need any further advice or assistance, please, contact the dealer where your machine was purchased, or contact Customer Service at service@equatorappliances.com
This appliance is an automatic
- WASH | 14 Lbs |
- WASH & DRYING | 9 Lbs dry weight of clothes |
|
|
|
|
1.The unit must be installed on a strong level floor, and in protected, dry, and
2.Installation on Carpet or Wood increases vibrations.
•Carpets – place on light carpet only.
•Wood – brace floor with screws and place additional sheets of plywood before installation.
3.This unit’s installation and grounding should be done in accordance with local codes by a qualified installer. “Installation Instructions” are included in this manual for the Installer’s reference.
4.The unit should be plugged into a properly grounded three (3) prong electrical outlet of 110V/60Hz with minimum 15 Amps, It should not be controlled by a wall switch or pull cord which might be turned off accidentally.
7 | Combo |
