Ericsson EDN312, IP DSLAM manual Mounting the IP Dslam, Insert Edge Connectors and LAN Cable

Mounting the IP DSLAM

4 Mounting the IP DSLAM

The illustration below shows how to mount the EDN312 after the subscriber lines, exchange lines through the EDGE connector have been pulled.

The EDGE connector is removed from the bracket-tool and inserted in the rear of the IP DSLAM. The IP DSLAM has been labelled with “line” on one side and “exchange” on the other side.

After the EDGE connectors have been inserted the IP DSLAM is pressed into place on the two rods in the subrack.

Figure 8 Insert EDGE Connectors and LAN Cable

1/1531-HSD 101 41 Uen A 2004-01-30 9