5.Take off the first samples and put the second samples (e.g. 30 pcs) on the scale platform.
6.Press “M+” key.
7.The ‘UNIT WEIGHT” display will show 
followed by 
.
8.Repeat the procedures until all the samples are counted.
9.Press “ZERO” key and “CE”, to clear the “WEIGHT” and “UNIT WEIGHT” display.
10.The total accumulated quantity will be displayed by pressing “M+” key.
11. Press “MC” key to cancel the accumulated quantity.
WEIGHT ACCUMULATING
1.When the “UNIT WEIGHT” display shows 0, place samples on the scale platform.
2.Press “M+” key. The weight will be stored.
3.Take off the first samples from the scale and put the second samples on the scale platform.
4.Repeat procedure (2) until all the samples are weighted.
5.To recall the accumulated weight, press “M+” key when “WEIGHT” and “UNIT WEIGHT” display show “0”.
6.Cancel the accumulated weight by pressing the “MC” key.
SELECTING WEIGHT UNIT
When the scale is power on, press the “KG/LB” key repeatedly to change weight unit according to following sequence:
kg
Displays 3 modes, e.g. | “kg” mode | 1.500kg |
| “g” mode | 1500g |
| “lb” mode | 3.32lb |
5
