Escient DVDM-100 user manual Connecting Sony DVP-CX777ES CD/DVD Changers

Connecting Sony DVP-CX777ES CD/DVD Changers

FireBall requires that you connect each changer to the back panel using audio and control cables.

Follow these steps to connect your Sony CD/DVD changers to your FireBall:

1.An RS-232 serial null modem cable with female DB-9 connectors on each end is required for connecting a Sony CD/DVD Changer.

2.Connect one end of the RS-232 serial cable into Communication Port number 1, on the back of your FireBall.

3.Connect the other end of the RS-232 serial cable into the “RS-232C” port on the back of your changer.

4.Locate the stereo RCA audio patch cable that came with your changer.

5.Connect one end of the RCA audio cable into the Analog In jacks number 1 on the back of your FireBall

6.Connect the other end of the RCA audio cable into the Analog Line Out jacks on the back of your changer.

• If you have more than one changer, repeat these steps to connect the additional changers to communications ports and audio jacks 2 and 3 respectively.

• For the best audio quality, you should also connect digital optical or coax audio cables (not included) between your changers and FireBall.

• For the best video quality, you should also connnect component video cables (not included) between your changers and FireBall.

Note: Control Cable Pin-Outs and Requirements. FireBall uses a standard null modem cable to connect between it’s RS-232 COM ports and external changers and control systems. Cables must be 25 feet or less in length.

PAGE 20

FireBall™ DVDM-100 User’s Manual