Identifying the Parts

ENGLISH

APOWER

Use this button to turn the unit on and off.

The indicator ring lights when the unit is ON.

BWORD

Displays the current word sync or master clock status (see page 10).

Press to engage the setup mode (see page 8).

Receives signals from the remote control unit. Point the remote control unit at this sensor when using the remote control.

You can use the P-05 remote control.

EDISPLAY

Displays the current input, sampling frequency, etc.

Switches digital input source. Select the terminal to which a digital device is connected. The display flashes when no digital signal is being input.

<The INPUT buttons (</>) on an Esoteric P-05 remote control can also be used.

The volume level can be adjusted from –∞ (MUTE), –99.5 to 0dB. Use these buttons to adjust the volume when connected directly to a power amplifier.

When a preamplifier is connected, set the volume to 0.0.

When in the set-up mode, these buttons are used to select the menu item for setting.

<The VOLUME buttons (–/+) on the P-05 remote control can also be used.

When using the P-05 remote control to operate this unit, set “RC” (Remote control) to “Enable” (see page 10).

Esoteric D-07 owner manual Identifying the Parts