Repeat mode
Use the REPEAT button to select the repeat mode for playback. Repeated presses of the REPEAT button cycle between the following options:
REPEAT TRK |
| REPEAT DSC |
|
|
| ||
(track repeat) |
| (whole disc repeat) |
REPEAT OFF (no repeat)
<Halting playback stops the repeat mode.
<The following buttons cancel repeat mode:
STOP, OPEN/CLOSE, POWER.
Track repeat
When this is selected, the
Disc repeat
The whole contents of the disc are repeated.
Programmed repeat
If programmed playback has been set up, the whole program is repeated.
Pushing the REPEAT button cycles between REPEAT PGM (program repeat) and REPEAT OFF (programmed playback takes place).
Analog output (2CH/MULTI)
When playback is stopped, use the 2CH/MULTI button to select either 2CH (stereo) or MULTI
2CH
The unit outputs
If
MULTI
The unit outputs the
Select this when the i.LINK (AUDIO) terminal is connected to a surround sound amplifier.
5.1 indicator will light on the display.
<Note that if “MULTI” is selected, only the front L/R sound of the
<This setting is also reflected on the setup menu.
<This setting has no effect on the DIGITAL OUT terminals.
15