Changing the display mode
During playback, it is possible to change the display as shown here.
<The DISPLAY button doesn’t work during programmed playback.
Currently playing track | Elapsed time of current track | ||
|
|
|
|
|
|
|
|
|
|
|
|
Time remaining for current track
Total elapsed time (disc) |
Total time remaining (disc) |
Clock Mode
For highly accurate playback, you can use the word clock (sync) output of an external unit such as the Esoteric
Use the CLOCK MODE (main unit) button to switch between Word ON and Word OFF.
When the unit is synchronizing to the external clock, the ring surrounding the button flashes. When it is locked, the button lights.
<Note that the sync connection should be made before the CLOCK MODE button is pressed. If no valid word sync signal is received, the display shows “No Word!”.
<This unit can accept and synchronize to the following frequencies received from external devices:
44.1kHz, 88.2kHz, 100kHz, 176.4kHz
18