CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

<DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN!

<IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.

<USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

IMPORTANT SAFETY INSTRUCTIONS

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

<Do not expose this apparatus to drips or splashes.

<Do not place any objects filled with liquids, such as vases, on the apparatus.

<Do not install this apparatus in a confined space such as a book case or similar unit.

<The apparatus draws nominal non-operating power from the AC outlet with its POWER switch in the off position.

<The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time.

<An apparatus with Class ! construction shall be connected to an AC outlet with a protective grounding connection.

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the equipment and/or the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Changes or modifications to this equipments not expressly approved by TEAC CORPORATION for compliance will void the user’s warranty.

2

Page 1 Page 3
Page 2
Image 2
Esoteric X-03 owner manual Important Safety Instructions, For U.S.A
Page 1 Page 3

X-03 specifications

Esoteric X-03 is a cutting-edge digital-to-analog converter (DAC) that represents the pinnacle of audio engineering and technology. Designed for audiophiles and music enthusiasts, the X-03 is built to deliver an exceptional listening experience, showcasing the intricacies of music with remarkable detail and fidelity.

One of the standout features of the Esoteric X-03 is its dual-mono construction, which minimizes crosstalk and ensures an optimally balanced audio output. This architecture allows for the separation of left and right channels, providing a clearer and more spacious soundstage. The high-performance DAC chips used in the X-03 are capable of handling a wide range of audio formats, including high-resolution PCM audio and DSD (Direct Stream Digital), making it a versatile choice for modern music consumption.

The X-03 employs proprietary technology, such as the Esoteric Clock Jitter Reduction system, which effectively minimizes timing errors that can deteriorate audio quality. By maintaining impeccable timing during playback, this technology ensures that the music retains its dynamic range and tonal accuracy. Furthermore, the DAC features a robust power supply design, including multiple isolated power transformers that cater specifically to digital and analog sections, reducing noise and providing stable performance.

In terms of connectivity, the Esoteric X-03 offers a comprehensive range of inputs including USB, balanced XLR, and RCA, accommodating various audio sources. The USB input supports PCM audio up to 32-bit/384kHz and DSD256, allowing users to tap into the highest quality digital audio files available.

The user interface of the X-03 is intuitive, featuring a bright display that provides essential information while allowing for easy navigation through various settings and inputs.

In conclusion, the Esoteric X-03 is not just a DAC; it’s a robust audio tool designed for those who appreciate the subtleties of sound. With its advanced technologies and meticulous design, the X-03 delivers a remarkable listening experience, ensuring that every note and nuance is captured and reproduced with precision. It stands as a testament to Esoteric's commitment to excellence in high-end audio equipment, making it a cherished component for any serious audio system.
Top Page Image Contents