Esoteric X-05 Word sync connector, Signal GND connection, Power cord receptacle, Wall socket

Connection (2)

D

BNC coaxial cable

WORD SYNC OUT

Master clock generator (AI-10, G-0s, G25U, AZ-1, etc.)

E	F
	Supplied power cord

Wall socket

DWord sync connector

This allows the use of an externally-generated word clock connection, using a commercially available BNC coaxial cable.

Connect the WORD SYNC OUT terminal on an amplifier AI- 10 or word clock generator to this unit.

ESIGNAL GND connection

Use a commercially available PVC-covered wire to connect the signal ground terminal on the unit to the amplifier signal ground on your amplifier.

<Note that this is NOT an electrical safety ground (earth).

FPower cord receptacle

After all other connections have been made, insert the supplied AC power cord into this receptacle, then connect the other end of the power cord into the wall socket.

<Although the power cord socket is 3 pin type, it is not connected to chassis.

<Use only the supplied Esoteric power cord. Use of other power cords may result in fire or electric shock. Unplug the power cord when you are not going to use the unit for an extended period of time.

Esoteric uses Esoteric MEXCEL stress-free 7N cables as reference.

Please see the optionally available Esoteric MEXCEL series.

RCA audio cable	XLR digital cable
XLR audio cable	BNC digital cable
RCA digital cable	Speaker cable

8