How to use your
DYMO LetraTag
Thank you for choosing the DYMO LetraTag
for your labeling needs.
Install Batteries
1.On the back of the unit, push the tab and lift the battery compartment cover off (fig. A).
2.Match the + and – marks on the batteries to the + and – marks in the battery com- partment case and insert 5 “AA” alkaline batteries. Start with the single battery in the upper slot, then slide the second and third under the bridge. Slot in the fourth and fifth batteries.
3.Press the battery cover back into place. Remove the batteries if the unit is to remain unused for an extended period of time.
Inserting the Tape Cassette
1.Press the tab on the front side of the cassette cover (figure B) and open cover. Insert the cassette, the cassette inserts with the tape exiting to the top of the machine. Gently press on the center of the tape until it clicks into position.
2.Close the cassette cover.
DisplayUS
The display will show 9 characters including the cursor and feature indicators that are highlighted when a feature is activated.
Feature indicators include:
CAPS Characters are typed as capital letters
BThe label will be print in BIG FONT
| ABC |
| The label will be printed in a certain | |
|
|
|
| type of box |
STYLE | The label will print with the style | |||
|
|
|
| selected |
|
| 123 | Number lock | |
| ||||
ABC | The text will be underlined | |||
If an incorrect key sequence is pressed, the display will flash.
Function Keys
ON/OFF 
Turns the unit on or off. When turning the unit on, a DYMO welcome screen will be displayed for a few seconds. The unit will auto- matically turn off after 2 minutes if no keys are pressed. The last label will be saved and displayed when the unit is turned on again. Note: If the batteries are removed for more than a few seconds the text and settings will not be saved.
5
