Manuals / Essick Air / Household Appliance / Fan

Essick Air CP70 manual Maintenance, Limited Warranty

Models: CP70

1 8
Download 8 pages 41.96 Kb
Page 3
Image 3

Maintenance

WARNING: Before doing any maintenance be sure unit is unplugged.

Drain Unit

To drain the unit, remove the media frame and remove the rubber drain stopper from the bottom of the unit by pulling it out of the drain hole. The unit should be drained periodically to keep the water fresh. We recommend draining the unit once a week. Drain the water from the unit when it will not be used for an extended period.

Note: To remove the media frame, first remove the two screws located at the top of the frame (see fig. 4). Tilt the frame back while pressing on the bottom of the frame where it says “Push” until it snaps out, then lift out. The water distribution hose can be removed from the media frame to allow complete separation of media frame from unit. Do not operate unit with media frame removed.

Clean/Replace Evaporative Media

The evaporative media should be cleaned twice a season or when needed. To clean the media, rinse with clean water. Light scrub- bing might be necessary. Be careful not to damage media. After 2 years, or when it becomes clogged, the media will need to be replaced. To remove the media, first remove the keeper disks from the keeper stems (see fig. 4). Remove the keeper stems from the media and remove the media.

When replacing the evaporative media, install it so that the steeper flute angle of the media is sloping down towards the media frame (see fig. 4). Push the keeper stems through the media from the back of the media frame and press the keeper disks onto the stems to secure the media in place.

Keeper

Disk

45°

15°

Screw

Keeper

Stem

Fig. 4

Limited Warranty

This warranty is extended to the original purchaser of an evaporative cooler installed and used under nor- mal conditions. It does not cover damages incurred through accident, neglect, or abuse by the owner. We do not authorize any person or representative to assume for us any other or different liability in connection with this product.

Terms And Conditions Of The Warranty

For One Year from date of purchase, we will replace any original component provided by Champion Cooler which fails due to any defect in material or factory workmanship only.

Exclusions From The Warranty

We are not responsible for replacement of evaporative media. These are disposable components and should be replaced periodically. We are not responsible for any incidental or consequential damage result- ing from any malfunction.

We are not responsible for any damage received from the use of water softeners, chemicals, de-scale mate- rial or plastic wrap.

We are not responsible for the cost of service calls to diagnose the cause of trouble, or labor charge to repair and/or replace parts.

How To Obtain Service Under This Warranty

Contact the Dealer where you purchased the evaporative cooler. If for any reason you are not satisfied with the response from the dealer, contact the Customer Service Department: Champion Cooler, 5800 Murray Street, Little Rock, Arkansas 72209. 1-800-643-8341. info@championcooler.com

This limited warranty applies to the original purchaser only.

Register your product online at www.championcooler.com/eac/onlineregistration-eac.htm

3

Page 2 Page 4
Page 3
Image 3
Essick Air CP70 manual Maintenance, Limited Warranty
Page 2 Page 4

CP70 specifications

The Essick Air CP70 is a remarkable evaporative cooler designed to provide enhanced comfort in various indoor environments. This unit is known for its energy efficiency and ability to deliver cool, refreshing air during hot weather. With its sleek design, the CP70 not only looks good in any space but also offers an array of features and technologies that set it apart from traditional cooling systems.

One of the standout features of the Essick Air CP70 is its impressive cooling capacity. It is equipped with a powerful fan that can circulate air throughout larger areas, making it an ideal choice for both residential and commercial use. The evaporative technology used in this cooler relies on the natural process of evaporation to lower the air temperature, making it an eco-friendly option compared to conventional air conditioning units that consume a significant amount of energy.

The CP70 also incorporates a large water reservoir that allows for extended use without frequent refills. This feature is particularly beneficial for those in hotter climates, ensuring that the unit can operate for extended periods while consistently delivering cool air. Furthermore, the cooler is designed with a built-in water level indicator, allowing users to easily monitor the water status and prevent any operational hiccups.

In terms of convenience, the Essick Air CP70 is outfitted with user-friendly controls, including an adjustable thermostat and multiple fan speed settings. These options allow users to personalize the cooling experience to fit their preferences, ensuring optimal comfort. Additionally, the unit’s lightweight design and integrated caster wheels make it easy to move from room to room, providing flexibility in cooling various spaces.

A notable aspect of the CP70 is its low maintenance requirements. The cooling pads are designed for durability and can be easily replaced, ensuring the unit operates efficiently for years to come. The easy-access water fill door also simplifies the refill process, enhancing user experience and convenience.

Overall, the Essick Air CP70 is a top-tier evaporative cooler that combines efficiency, convenience, and user-friendly features. It offers an eco-friendly cooling alternative without sacrificing performance, making it an excellent choice for anyone seeking relief from heat.