High Capacity
Axial Fan
Evaporative Cooler
Model Series
FAD242
FAD248
Circle the model of your cooler and record the serial number below.
Encierre con un circulo el modelo de su enfriador y escribe el número de serie abajo.
Serial #
Número de Serie
Read Carefully All Of This Manual Before Installing The Unit
Lea Con Cuidado Todo Este Manual Antes De Instalar La Unidad
Table Of Contents
Safety Instructions | 1 | Warranty | 4 |
Operation | 1 | General Specifications (Especificaciones Generales) | 5 |
Installation Instructions | 2 | Motor Specifications (Especificaciones Del Motor) | 5 |
Maintenance Section | Parts List - Blower Section (Lista De Piezas) | ||
Electrical Wiring Diagrams | 3 | Parts List - Wet Section (Lista De Piezas) | |
Troubleshooting | 4 | Spanish (Instrucciones en Español) | |
|
|
|
|
|
|
|
|
|
|
|
|
Read And Save These Instructions
Safety Rules
1.Read instructions carefully.
2.Disconnect all electrical service that will be used for the unit before you begin the installation.
3.Electrical hook up should be done by a qualified electrician, so that all electrical wiring will conform to your local standards.
4.For a maximum safety precaution, make sure cooler cabinet is properly grounded to a suitable ground connection.
5.Cooler must be connected to proper line current, voltage and cycle, as stamped on cooler motor and pump motor specification plate.
6.This unit must be installed at a height of 10 feet or greater from the floor.
7.Always Disconnect Power before performing any maintenance.
Operation
To eliminate delivery of hot air when starting cooler, Start the pump without the blower for the first few minutes, then turn on the blower motor.
These coolers may be used without water for ventilation purposes. When outside air is cool (for example, at night) or when humidity is high the water pump can be turned off.
110497 |