Operating Your Dryer
In This Section Page
Page
Before starling your dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Se ecting a cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 6
Starting or stopping your dryer . . . . . . . . . . . . . . . . . . . . . . . 6
Operating your dryer properly assures the best dryinf results. This section gives you important
information to help you to select a cycle, time and tertperature.
Before starting your dryer
Refer to the information below, and “Laundry
N DTE:
If your dryer has a Consumer Buy
Tips” on page 12 for control setting, sorting and Guide, remove it and place it with your Use
loading information. alld Care Guide. Wipe out dryer drum with a
d;rmp cloth before using to remove dust from
slripping and storing.
Starting or stopping your dryer
Starting your dryer
Close the door and select a cycle. Push the Start
Button. See pages 6-8 for additional setting
information. Your dryer automatically stops when
a cycle ends.
Stopping and restarting your
dryer
Open the dryer door or turn the Cycle Control
Knob to OFF. Close the door; make new selec-
tion (if necessary). Push the Start Button.
NOTE:
The Cycle Control Knob should point to
an OFF area when the dryer is not in use. If the
dryer is stopped before the cycle is finished, turn
the Cycle Control Knob to an OFF area.
\ ! x5- @i$ - \ i Selecting a cycle
Use your High Heat automatic cycle to dry
most loads. See “Using the High Heat auto-
matic cycle” and “Using the Timed (high heat)
cycle” for more information.
1.
Select a cycle by turning the Cycle Control
Knob either way to a desired time or setting.
2. Stop when the indicator on the knob’s outer
ring points to the setting you want.
3. Push the Start Button.
Changing a selection:
1.
Turn the Cycle Control Knob to point to a
new setting.
2. Push the Start Button, if necessary.