l Good water quality is important for good ice
quality. It is not recommended that the ice maker be connected to a softened water supply. Water softener chemicals, such as salt from a matfunctioning softener, can damage the ice maker mold and lead to poor ice quality. lf a softened water supply cannot be avoided, it is important that the water softener be well maintained and operating properly.
Changing the light bulb
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply. Turning the Temperature Control to the OFF position does not disconnect the refrigerator from the power supply.
Failure to do so could result in electrical shock or personal injury.
To change the refrigerator light:
1.Disconnect refrigerator from power supply.
2.Reach behind the Control Panel to remove bulb.
3.Replace with a
4.Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size, wattage and shape.
Reversing the door swing
You can change the hinges on your refrigerator so the doors open the other way. Refer to the instruction sheet included with your refrigerator.
10
