r | I |
Using Your Dishwasher
Models TUD3000W (shown)
TUD2ooOW
r
| - | II | Spray | tower | |
|
| I |
| protector | |
Rack | bumper | - | Silverware | basket | |
I |
|
|
| ||
|
| I | Filter system | screen | |
Water | inlet opening |
| (not shown) | ||
I |
|
|
| ||
|
|
|
|
| |
|
| F | Lower | spray arm | |
|
|
| Overfill | protector | |
|
|
| Detergent | dispenser | |
The drawings in this book may vary slightly from your dishwasher model. They are designed to show the different features of all the models covered by this book.
NOTE: Your model may not include all the features shown.
Before starting dishwasher
1.Read “Important Safety Instructions” on page 2 before starting your dishwasher.
2.Properly load the top and bottom racks, and silverware basket. See pages 4 and 5.
3.Spin the lower spray arm to make sure nothing will stop it from turning freely.
4.Add detergent. See page 5.
5.Check rinse agent dispenser. See page 5.
6.Push door firmly when closing and it will automatically latch.
7.Run hot water at sink nearest dishwasher until it is hot. Turn it off.
w | Access panel |
s Door color panel
Heating element ’
‘Rinse agent dispenser
Model and serial number label (on right side)
Cycle and options (Model TUD2OOOW)
Starting dishwasher
NOTE: If the door is latched, you will hear cycles start and stop as the knob passes each cycle mark. This is normal and will not hurt the dishwasher. If you prefer, you can set cycles with the door unlatched.
Model TUD2000W
1.Select a drying option.
2.Turn the Cycle Control Knob clockwise to point to WASH. The dishwasher will automatically start the cycle.
Model TUD3000W
Wash cycle
A double wash for moderate to heavily soiled loads. (The Energy Guide Label data is based on this cycle.)
Select the mark next to WASH with the Cycle Control Knob. The cycle sequence will be:
Wash+Rinse+Rinse+Wash+Rinse+Rinse+
Rinse+Dry+Off
Dry Select options
If the HEATED DRYING Option Selector Button is pushed, air in the dishwasher is heated during the “dry”part of the cycle.
For best drying results, use a liquid rinse agent.
If the ENERGY SAVER Option Selector Button is pushed, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting. may result.Some items (such as plastics) may need towel drying.
For best drying results, use a liquid rinse agent.
1.When using any cycle except Pots 8 Pans, select a drying option. (Select AIR DRY for the Rinse & Hold Cycle.) Drying options may be changed by pushing an Option Selector Button again.
2.Turn the Cycle Control Knob clockwise to point to a desired cycle. When using the Pots 8 Pans Cycle, you must also push the POTS & PANS Selector Button.
The dishwasher will automatically start that cycle.
Continued on next page
Page 3
