REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot.

Power failure

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to IGNITE. After burner lights, turn knob to setting.

Sealed Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.

A

BD

E

C

A. Burner cap

B. Burner base

C. Alignment pins

D.Igniter

E.Gas tube opening

Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the “General Cleaning” section.

Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Protect it from spillovers by always using a burner cap.

A

B

A.1-1¹⁄₂" (25-38 mm)

B.Burner ports

Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners, bleach or rust removers.

1.Remove the burner cap from the burner base and clean according to “General Cleaning” section.

2.Clean the gas tube opening with a damp cloth.

3.Clean clogged burner ports with a straight pin as shown. Do not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted, contact a trained repair specialist.

4.Replace the burner cap, making sure the alignment pins are properly aligned with the burner cap.

A

B

A.Incorrect

B.Correct

5.Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, do not service the sealed burner yourself. Contact a trained repair specialist.

Home Canning

When canning for long periods, alternate the use of surface burners between batches. This allows time for the most recently used areas to cool.

■Center the canner on the grate.

■Do not place canner on 2 surface burners at the same time.

■For more information, contact your local agricultural department. Companies that manufacture home canning products can also offer assistance.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a well-fitting lid, and the material should be of medium-to-heavy thickness.

Rough finishes may scratch the cooktop or grates. Aluminum and copper may be used as a core or base in cookware. However, when used as a base they can leave permanent marks on the cooktop or grates.

Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of aluminum.

Cookware with nonstick surfaces should not be used under the broiler.

6

Page 5 Page 7
Page 6
Image 6
Estate W10017560 manual Sealed Surface Burners, Home Canning, Cookware, Power failure, To Clean
Page 5 Page 7

W10017560 specifications

Estate W10017560 is a remarkable property that exemplifies modern luxury living blended with timeless elegance. Situated in a prime location, this estate offers an impressive array of features and technologies, making it one of the most sought-after properties in the market.

One of the standout characteristics of Estate W10017560 is its expansive layout, boasting over 8,000 square feet of meticulously designed living space. The estate includes multiple spacious bedrooms and luxurious en-suite bathrooms, providing ample comfort and privacy for family members and guests. The master suite is particularly noteworthy, featuring a grand walk-in closet and a lavish bathroom equipped with a soaking tub and state-of-the-art fixtures.

The heart of the home is undoubtedly its gourmet kitchen, which is a chef's dream. Outfitted with top-of-the-line appliances, including a professional-grade gas range and double ovens, the kitchen also features custom cabinetry and a large island that serves as both a workspace and a gathering spot for family and friends. The open concept design allows for seamless flow into the dining and living areas, making it ideal for entertaining.

Technology is at the forefront of this estate, as it is equipped with a smart home system that allows residents to control lighting, heating, and security with ease. The home features energy-efficient systems, reducing its carbon footprint while enhancing comfort. Additionally, a premium sound system is integrated throughout the estate, ensuring that every room resonates with quality audio.

Outdoor living is equally impressive, with beautifully landscaped grounds that include an infinity pool, spa, and outdoor kitchen. The spacious patio area is perfect for summer gatherings and alfresco dining, while manicured gardens provide a serene backdrop for relaxation.

Safety and privacy are paramount at Estate W10017560, which includes advanced security features such as surveillance cameras and controlled access entry. This estate not only provides luxurious amenities but also fosters a sense of tranquility and exclusivity.

In summary, Estate W10017560 combines luxurious living with cutting-edge technology, creating a unique haven for those who appreciate the finer things in life. With its stunning design, advanced features, and beautiful outdoor spaces, this estate is truly an exceptional investment in a lifestyle of comfort and sophistication.
Top Page Image Contents