ETA Systems EPDLOIEC-CE Specific Features For Models, General Operating Instructions, Servicing

	SPECIFIC FEATURES FOR MODELS:
FEATURE
LIGHT SWITCH	EPD11LIEC-CE, EPD11LVIEC-CE, EPD11LOIEC-CE
LIGHT TUBES	EPD11LIEC-CE, EPD11LVIEC-CE, EPD11LOIEC-CE
VOLTAGE DISPLAY	EPD10VIEC-CE, EPD11LVIEC-CE
CIRCUIT BREAKER	EPD10IEC-CE, EPD10VIEC-CE, EPD11LIEC-CE, EPD11LVIEC-CE
POWER SWITCH	EPD10IEC-CE, EPD10VIEC-CE, EPD11LIEC-CE, EPD11LVIEC-CE
(1) FRONT PANEL	EPD11LIEC-CE, EPD11LVIEC-CE,
IEC320 OUTLET
(1) BACK PANEL	EPD10IEC-CE, EPD10VIEC-CE, EPD11LIEC-CE,EPD11LVIEC-CE, EPD11LOIEC-CE
IEC320 MALE INLET
(10) BACK PANEL	EPD10IEC-CE, EPD10VIEC-CE, EPD11LIEC-CE,EPD11LVIEC-CE
SWITCHED

General Operating Instructions:

1.Install unit in a standard 19-inch (48.25cm) rack or in a free-standing position.

2.Connect Power Distribution/Lights Only unit to 230VAC 50/60Hz power source.

3.Plug sensitive electronic equipment into conditioned outlets on back of unit.

4.Move the power switch (#5) to the "ON" position to provide power and protection to the electrical equipment.

5.For illumination (Models EPD11LIEC-CE, EPD11LVIEC-CE, and EPDLOIEC-CE), pull out/extend the light tubes (#2) and move the light switch (#1) to either the "HI" or "LO" positions.

IMPORTANT: Be sure the light switch (#1) is in the "OFF" position when the light tubes are recessed back inside the unit.

6.The digital voltmeter readout (#3) automatically and continuously displays the incoming voltage to the unit (Models EPD10VIEC-CE and EPD11LVIEC-CE).

SERVICING:

WARNING: Hazardous voltages are present within the unit. Never attempt any maintenance without disconnecting the power cord.

ATTENTION: Les tensions de l'appareil présentent des dangers. Déconnectez le cordon d'alimentation avant d'effectuer toute réparation.

VERWARNEND: Gefährlich stromspannung bist im einheit. Test nicht versuch erhaltung ohne ent- fernend das gewalt schnur.

AMMONIMENTO: Pericolosa voltaggio siamo presentano negli unità. Do non tentative mantenimento senza allontanando gli potenza spago.