AT-100 - FRONT PANEL FEATURES & DESCRIPTIONS

1. POWER ON/OFF SWITCH: Turns the AT-100 on and off.

5.

MASTER LOW RESONANCE: Controls the overall resonance

2. STANDBY ON/OFF SWITCH: Allows the AT-100 to remain

6.

of the amplifier. Turning the control clockwise adds rich low end.

 

turned ON for limited periods of inactivity without the risk of

MASTER VOLUME: Controls the overall signal level of the

 

damaging / over-heating the amplifier tubes. When the Standby

 

AT-100. To increase the overall signal and/or volume, rotate

 

switch is in the STANDBY position the AT-100 is in a non-

 

the control clockwise. The Master volume control allows you to

 

operational setting. When in Standby the Sovtek tubes remain

 

preset the output levels of both the Clean and Overdrive

 

hot and ready for use. This bypasses the time required for the

7.

Channels.

 

tubes to warm up before use. When the Standby switch is in the

CLEAN CHANNEL – VOLUME: Controls the overall signal level

 

ON position the AT-100 is operational and should not be left

 

of the clean channel.Adjusting the volume control enables you to

 

inactive. DO NOT turn on the AT-100 or have the Standby

 

produce sparkling clean sounds to crunchy, dirty blues. Turned

 

switch set to ON without it connected to a loudspeaker.

 

all the way to the left you will experience clean sounds. A setting

3. PILOT JEWEL. Power on indicator.

8.

all the way to the right will produce moderate levels of distortion.

4. MASTER REVERB CONTROL: Adjusts the amount of reverb

CLEAN CHANNEL - BRIGHT: Adds high end sparkle.

 

produced by the amplifier. To increase the amount of reverb turn

9.

CLEAN CHANNEL - TREBLE: Adjusts the amount of high

 

clockwise.

 

frequency boost or cut as desired in the clean channel. Treble

 

WARNING: SHOCK HAZARD!

 

adds brightness to your tone. Turning this control clockwise will

 

 

add brilliance to your sound. Turning the control counter-

 

To reduce the risk of fire or electrical shock, do not expose this unit to rain

10.

clockwise softens the tone.

 

or moisture. Do not operate your AT-100 near a pool or other standing

CLEAN CHANNEL - MIDDLE: Adjusts the amount of mid-range

 

water. Make sure all blades on the polarized power plug are fully inserted

 

frequencies as desired in the clean channel. Turning the middle

 

into the power source. Ensure the powercord is not stretched, pinched or

 

control clockwise will increase the amount of warmth in your

 

otherwise abused. Ensure the power cord is routed to avoid foot traffic.

 

tone. Counterclockwise settings create a more pristine, acoustic

 

Your AT-100 amplifier should be cleaned only with a dry cloth.

 

kind of sound.

AT-100 - Rear Panel Features & Descriptions

26. EFFECTS - SEND JACK: Connects to the AT-100 to the input off an effects unit.

27. EFFECTS – SEND LEVEL: Controls the sending level output to an effects unit.

28. EFFECTS – RETURN LEVEL: Controls the input capacity of the returning signal from an effects unit.

29. EFFECTS – RETURN JACK: Connects the AT-100 to the output of an effects unit.

4

30. FOOTSWITCH – GAIN AND CHANNEL SWITCH: Switch

 

between Gain 1 and Gain 2 in the overdrive Channel. Also switches between clean and overdrive channel.

31. FOOTSWITCH - EFFECTS/REVERB: Connects footswitch to turn the reverb on/off and the effects loop on/off.

32. LINE OUT JACK: Connects the AT-100 to an external line- level device such as a mixing board.

33. LINE OUT LEVEL CONTROL: Controls the output capacity of the Line Out Level.

34. IMPEDANCE SELECTOR SWITCH: Allows the AT-100 to safely

Page 4 Page 6
Page 5
Image 5
ETI Sound Systems, INC specifications AT-100 Front Panel Features & Descriptions
Page 4 Page 6

AT-100 specifications

ETI Sound Systems, INC has made a remarkable entry into the audio equipment market with its flagship product, the AT-100. This state-of-the-art sound system is designed for professionals and audiophiles seeking an unmatched listening experience. The AT-100 is a testament to ETI Sound Systems' commitment to excellence in sound technology.

One of the standout features of the AT-100 is its advanced digital signal processing capabilities. The system employs cutting-edge algorithms to ensure pristine audio quality with minimal distortion. Users can enjoy a rich and immersive sound that captures every detail in their music. Additionally, the AT-100 utilizes high-resolution audio format support, allowing for playback of audio sources up to 24-bit/192kHz, making it compatible with the latest high-definition audio files.

The AT-100 is built with a robust design, featuring high-quality components that ensure durability and longevity. The chassis is crafted from a combination of aluminum and steel, providing both aesthetic appeal and structural integrity. The system is equipped with premium-grade speakers that deliver a wide frequency response, ensuring that every note is reproduced accurately, from the deepest bass to the highest treble.

Flexibility is another key characteristic of the AT-100. The system supports multiple connectivity options, including Bluetooth, USB, and headphone jack inputs. This versatility allows users to connect a variety of devices effortlessly, whether it's a smartphone, laptop, or high-fidelity audio player. Furthermore, the AT-100 includes an intuitive user interface that simplifies navigation through settings and audio sources.

A notable innovation within the AT-100 is its built-in room calibration technology. The system automatically analyzes the acoustics of the environment and adjusts the sound output for optimal performance. This ensures that users enjoy consistent audio quality, regardless of where they set up the system.

In summary, the ETI Sound Systems, INC AT-100 is a powerful and versatile sound system designed for audio enthusiasts. With its unbeatable sound quality, durable construction, and modern connectivity options, it's an ideal choice for anyone looking to elevate their listening experience to new heights. Whether in a professional studio or a home setup, the AT-100 delivers audio performance that truly stands out in the competitive audio market.
Top Page Image Contents