ETI Sound Systems, INC Important Safety Information, GETTING TO KNOW YOUR LG-200AS, Line Out

IMPORTANT SAFETY

INFORMATION

1.Read these instructions.

2.Follow all instructions.

3.Keep these instructions.

4.Heed all warnings.

5.Do not use the LG-200AS near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation open- ings. Use in accordance with the manufacturer’s instructions.

8.Do not use near any heat sources such as radiators, stoves, or other devices that may produce heat.

9.Do not defeat the safety purpose of the polarization or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the pro- vided plug does not fit your outlet, consult an electrician for replace- ment of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at the plug and the point where it exits the LG-200AS amplifier.

11.Only use attachments / accessories specified by B-52 Pro-Audio.

12.Unplug the LG-200AS during light- ning storms or when un-used for long periods of time.

13.Refer all servicing to qualified personnel. Servicing is required when the LG-200AS has been dam- aged in any way such as when power-cord or plug is damaged, liquid has been spilled, been exposed to moisture or rain, does not operate normally, or has been dropped.

14.To reduce the risk of fire or electric shock, do not expose the LG-200AS to rain or moisture.

FRONT PANEL VIEW

			STEREO CHORUS
POWER
							ON
ON		PHONES	0	10	0	10	0	10	0	10
			RATE		DEPTH		MASTER		REVERB
	LG-200AS
1		2		3		4	5	6		7

GETTING TO KNOW YOUR LG-200AS

(1)Power Switch: Turns the amplifier ON or OFF

(2)Phones: Connects a stereo headphone

(3)Rate: Adjusts stereo chorus rate

(4)Depth: Adjusts stereo chorus depth

(5)On/off: Turns stereo chorus on/off

(6)Master: Controls the overall signal level of the guitar amplifier

(7)Reverb: Adjusts the reverberation effect

(8)Clean Channel Treble: Adjusts the amount of high frequency boost or cut as desired in the clean channel

(9)Clean Channel Middle: Adjusts the amount of mid frequency boost or cut as desired in clean channel

(10)Clean Channel Bass: Adjusts the amount of low frequency boost or cut as desired in clean channel

(11)Clean Channel Level: Controls the complete signal of the clean channel

(12)Channel Switch: Selects between clean and overdrive channel (LED for Overdrive Channel indicates when O.D. is in use. LED for Clean)

REAR PANEL VIEW

FOOT SWITCH

0 10		0 10					0	10	CA
LEVEL	RETURN LEVEL		SEND	REVERB					RE
					CHANNEL	LINE OUT
							LEVEL WA
				STEREO	GAIN				OR
				CHORUS					TH
22	23	24	25	26	27	28		29

(22)Send Level: Controls the sending signal level.

(23)Send Jack: Connects the guitar amplifier to input of an effects unit.

(24)Return Level: Controls the returning signal level.

(25)Return Jack: Connects the guitar amplifier to out put of an effects unit.

(26)Footswitch Jack: Connects a footswitch to switch reverb ON and OFF.

(27)Footswitch Jack: Connects a footswitch to select clean/overdrive channel and gain1/gain2 channel.

(28)Line Out Jack: Connects a unit with line level input, e.g. mixer.

(29)Level Control: Controls the Line Out Level.

2