WARRANTY
Thank you for choosing this
(2)TWO YEARS from the original purchase date. A dated sales receipt will establish coverage under this warranty. This warranty will automatically terminate (2) two years after the original sales date. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. See provided Limited Warranty Card for additional terms and conditions.
INCIDENTAL OR CONSEQUENTIAL DAMAGE: In no event E.T.I. Sound Systems, Inc. be liable for any inci- dental or consequential damages arising out of the use or inability to use of any
RETURN PROCEDURES: In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped together with a proof of purchase, freight prepaid and insured to the Authorized
FOR YOUR PROTECTION: Please complete and mail the Purchase Information Card within (10) ten days of the date of purchase so that we may contact you direct- ly in the event a safety notification is issued in accor- dance with the 1972 Consumer Product Safety Act. In addition, we ask that you complete the brief question- naire so me may analyze your answers and in this way, help us evaluate our customer needs. See provided Limited Warranty card for additional terms and condi- tions.
4
FEATURES
■1/4” high input jack
■Overdrive channel with gain 1, gain 2 with contour,
■Clean channel with level control and
■Master volume and spring reverb
Foot switch for channel select, reverb on/off, gain select & stereo chorus on/off
■Push switch for channel / gain select and stereo chorus on/off
■Headphones line out
■Effects send and return with level controls
■Line out with level control
■External speaker jacks
■Ground lift switch
■Stereo chorus with depth and rate controls
■Stereo / bridge switch
SPECIFICATIONS
Output Power | 100 + 100 watts RMS @ 8 ohms stereo | ||
|
| 120 + 120 watts RMS @ 4 ohms stereo | |
|
| 200 watts RMS @ 8 ohms bridged | |
Input Impedance: | 500K Ohms | ||
Maximum Input Level: | |||
Power Consumption: | 160 Watts | ||
S/N Ratio: | Greater Than 100 dB | ||
Affects Send: | Load Impedance 1K Ohm or Greater | ||
Nominal Output Level: | |||
Effects Return Impedance: | 100K Ohms | ||
Optimum Input Level: | |||
Line Out: | 0dB / 1V RMS | ||
Phones: | 60mW into 8ohm | ||
Equalization: | Bass : +/- 15dB at 50Hz | ||
|
| Middle : +/- 10dB at 600Hz | |
|
| Treble : +/- 18dB at 3KHz | |
Dimensions: | 28” (W) x 10” (D) x 11” (H) | ||
Weight: | 41 lbs | ||
|
|
|
|
|
|
|
|
E.T.I. Sound Systems is dedicated to product excellence and therefore continuously attempts to improve each and every model we manufacture. This ongoing process includes refinements in design, materials and workmanship, which may result in prod- ucts that differ than those described in our literature. All features, specifications, and prices are therefore subject to change without notice.
E.T.I. SOUND SYSTEMS, INC.
3383 Gage Avenue, Huntington Park, CA, 90255
Phone: 323-277-4100 Fax: 323-277-4108
National: