Coleman PM402511 Generator Specifications, Engine Specifications, Fuel Specifications, Dimensions

Models: PM402511

1 32
Download 32 pages 25.03 Kb
Page 6
Image 6
GENERATOR SPECIFICATIONS

GENERATOR SPECIFICATIONS

Rated Wattage - (Standby) 25,000 Watts@1.0PF LPG 22,000 Watts @ 1.0 PF NG

Voltage - 120/240 volts

Rated Current - 208/104 amps LPG Frequency - 60 HZ

Power Factor - 1.0

Max. Ambient Temp Rise - 105°C Insulation class - H

Note: Rated wattage is specified at sea level, 60°F ambient temperature, and propane fuel (with 2500 BTU/cuft). Rated wattage decreases approximately 3.5% for each 1000ft above sea level and approximately 1% for each 10°F above 60°F ambient temperature.

ENGINE SPECIFICATIONS

Ford 2.5 - Liter

Type - Water cooled inline (4 cylinders) RPM - 1800

Displacement - 2500cc(153in³) Bore X Stroke: 3.78in X 3.40in. Compression Ratio:9.37:1

Valve arrangement - Overhead valve Governor - Electronic, Isochronous Ignition system - Solid state Starter - 12vdc, Solenoid Shift Alternator - 12vdc, 90A

Oil capacity - 4.0 qt (3.79L) without filter, 4.50 qt (4.26L) with filter change. Oil filter - Motorcraft FL400

Radiator capacity - 2.5 gallons, (9.46L). Shipped with 50/50 mix of water and propylene glycol antifreeze. Spark plug - Motorcraft AWSF 52C.

Battery - BCI Group, minimum 550 CCA. Air filter - Contact factory

FUEL SPECIFICATIONS

Minimum Content Requirements:

1000 Btus per cubic foot for Natural Gas (NG)

2520 Btus per cubic foot for Liquid Propane vapor (LPG)

Fuel supply pressures must be between 4oz (7” w.c.) and 6oz (11” w.c.) at inlet to the unit.

Consumption at Full Load:

345 cubic feet per hour of Natural Gas (NG)

3.77gallons per hour of Liquid Propane vapor (LPG) (1 gallon is equal to 4.26 pounds (LPG)

DIMENSIONS

79”L x 34”W x 43”H (See next page for installation drawing). Shipping Weight: 1525 lbs.

6

Page 6
Image 6
Coleman PM402511 owner manual Generator Specifications, Engine Specifications, Fuel Specifications, Dimensions