E S P 2 0 0 0 O P E R AT I O N M A N U A L

7SETTING ALARM TIME

(REMARK: please make sure the 'e' ONIOFF switch is in 'OFF' position to set alarm time or operate the alarm function)

TO SET ALARM TIME:

Hold SET button (13) for two seconds to enter set mode, press SET button (13) twice to show the symbol and flash the alarm hour digits, then press UP (10) or DOWN (12) button to set alarm l hour.

-Press MODE button (9) once to flash the alarm minute digits, then press UP (10) or DOWN (12) button to set alarm l minutes

-Press MODE button (9) once again to finish alarm l setting (all digits steady) or press SET button (13) to continue alarm 2 setting

TO SET ALARM 2 TIME:

-Hold SET button (13) for two seconds to enter set mode, press SET button (13) three times to show the symbol and flash the alarm hour digits, then press UP (10) or DOWN (12) button to set alarm 2 hour.

-Press MODE button (9) once to flash the alarm minute digits, then press UP (10) or DOWN (12) button to set alarm 2 minute.

-Press MODE button (9) once again to finish alarm 2 setting (all digits steady) or press SET button (13) to continue zone setting.

Setting Alarm ON/OFF

To turn alarm l ON: Press ALARM button (10) until the display shows both the alarm time and symbol. Press MODE button (9) until it returns to normal month and date display.

8 SETTING ALARM ON/OFF

TO TURN ALARM 1 ON:

With the radio turned off, keeping the ALARM button (9) pressed, set the correct wake up hour and minutes with the HOUR (3) and MINUTE (4). They can be pressed with quick, short presses to advance slowly or they can be kept pressed rapidly. When finished, release the ALARM button and this will cause the loudspeaker symbol appears in the display.

If you want to deactivate the alarm, press the ALARM button (9) again and the loudspeaker symbol will disappear from the display. When the activated alarm turns the radio on, it can be turned off by pressing the ALARM button (9) again. The Power button (7) cannot be used for this purpose.

While the radio is playing in alarm mode and without any manual interruption to deactivate the alarm, it will turn off automatically after 60 minutes.

TO TURN ALARM 1 OFF:

Press ALARM button (10) until the display shows both OFF and symbol. Press MODE button (9) until it returns to normal month and date display.

TO TURN ALARM 2 ON:

Press ALARM button (12) until the display shows both the alarm time and symbol. Press MODE button (9) until it returns to normal month and date display.

TO TURN ALARM 2 OFF:

Press ALARM button (12) until the display shows both OFF and symbol. Press MODE button (9) until it returns to normal month and date display.

8

9

Page 5
Image 5
Eton ESP2000 operation manual Setting Alarm Time, Setting Alarm ON/OFF