8

SETTING ALERT MODE (SIREN or VOICE)

Turn off the radio and press the MENU button. SETUP TIME appears in the display. Press the button twice. ALERT appears in the upper part of the

display, with SIREN or VOICE to its right. Press the button and SIREN

or VOICE flashes. Press the buttons to select the one that you wish to hear when an ALERT is activated. Press MENU twice to exit and save the setting.

While the alert SIREN is activated, you can press the ON/OFF ALERT button at the top of the radio to turn it on or off.

SETTING S.A.M.E.

Codes in the US, CLC Codes in Canada

S.A.M.E. = Specific Area Message Encoding

CLC = Canadian Location Codes

A six-digit code instructs the radio only to receive an ALERT when the code is programmed in. There are far too many S.A.M.E and CLC codes to include them all in this manual. We therefore provide the following to assist you in looking up the code for your area.

Look up a United States county code at the following web site: http://www.nws.noaa.gov/nwr/indexnw.htm#sametable

Look up a Canadian CLC code at: http://www.msc-smc.ec.gc.ca/msb/weatheradio/transmitter/index_e.cfm

Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can be set to receive ALL coded information sent from any transmitter, if you’re within range. When you set codes, it will only pick up alerts when you’re in that county or within reception distance of the signal. ALL, MULTI

or SINGLE COUNTY will appear in the lower left side of the display, depending on how you have set it.

Page 8
Image 8
Eton FR800 user manual Setting Alert Mode Siren or Voice, Setting S.A.M.E