Eureka 100-110 How To Assemble, Step a Unpack Body of Vacuum and Handle, Step B Attach Handle

Important Battery Disposal Information - Call 1-800-822-8837

Nickel-Metal Hydride Batteries

Your vacuum cleaner contains nickel-metal hydride batteries. To protect our environment, prop- erly dispose of the vacuum when the batteries no longer hold a charge. A municipal waste will not dispose of the product with battery intact. Remove the batteries by cutting the connector wires one by one before you discard the appliance. Do not dispose of batteries with your regular household trash. Remove the batteries and take or send it to your nearest Eureka Warranty Service Station.

To learn the address of the nearest factory service center call 1-800-282-2886. CAUTION: Do not short circuit or dispose of in fire.

How To Assemble

CAUTION: Assemble the cleaner completely before plugging into an electrical outlet.

CAUTION: Moving parts, stay clear of brush roll when plugging in. Make sure brush roll is clear of moving parts when plugging in.

NOTE: Features may vary by model yet all parts assemble the same.

Step A Unpack Body of Vacuum and Handle

Handle

Release

Button

Handle

Tabs

Vacuum Body Handle

1.Remove vacuum body and handle from carton. Locate the handle release button on body and the handle tabs on handle.

Step B Attach Handle

2.Position handle above vacuum body. Line up the handle tabs to the notches in the opening at the top of the vacuum body.

3.Press down on the handle release button as shown above. Slide the handle down into the unit, until it clicks into place.

3