HOW TO ASSEMBLE AND USE (continued)
The Hot Shot’s articulating nozzle allows the steam to be directed as desired. To use the articulating nozzle, align the single marks on the attachment and appliance, push the attachment onto the articulating nozzle until it covers the round gasket (See page 7). Now turn clockwise until the single mark on the attachment is aligned with the double mark on the appliance. Now you can direct the steam as desired.
Hexagonal end of nozzle
5.To attach the scrub brush and angled nozzle.
Scrub Brush | Angled Nozzle |
Both of these attachments can be applied to the articulated nozzle (on appliance) straight nozzle, and the flexible extension hose.
Decide on your desired angle, then push the attachment onto the hexagonal end of the nozzle.
6.To attach the window cleaning tool.
CAUTION: Do not use the window cleaning tool on cold glass. It may break the glass.
First attach the fabric tool to either the appliance or the flexible extension hose. Remove the cloth from the fabric tool. There are two open tabs on the back edge of the fabric tool and there are two hinges on the back edge of the window cleaning tool. Place the hinges into the open tabs, then swing the window cleaning tool up against the bottom of the fabric tool until the two pieces click together. To remove the window cleaning tool from the fabric tool. Just push your thumb against the fastener on the window cleaning tool, they will separate.
Window Cleaning Tool | Fabric Tool |
Tabs
Hinges
8
