HOW TO ASSEMBLE
Loop
Attach Handle
1. | Locate the handle and body. | Handle | |
2. | Line the handle up with the hole in the | ||
| |||
| top of the body. Flat side of handle and |
| |
| loop forward. |
| |
3. | Push handle down into body while |
| |
| pressing button on back of the body. | Button | |
| Handle will click into place. | ||
|
| Body |
4. There are two handle positions available. Handle all the way up and handle all the way down.
5.Button needs to be depressed to raise and lower the handle.
HOW TO USE
Power Switch
The power switch has three positions. Off, Floor (hard surface cleaning) and Carpet.
Power Switch
Nozzle with Edge Kleener®
Airflow under the nozzle automatically directs suction to the edges and corners for maximum full width cleaning.
Experiment with your hard floor surfaces, sometimes it is best to have brush roll turning. (Switch in the carpet position).
Dual Uses
Push the handle button to release lock. The handle will slide freely until it finds one of the two available handle positions. It automatically locks in either of these two positions.
With the handle collapsed, the unit is great for stairs and compact storage. With the handle extended, the unit is great for floor cleaning.
Stair
Cleaning
Handle
6