Eureka 439AZ manual How to Identify Parts of Vacuum Cleaner, Maintenance Schedule

How to Identify Parts of Vacuum Cleaner

Handle		Cord retainer
	Hose holder
		Dust cup release button
	Power switch
Telescopic handle		Upper cord wrap
Hose		Telescoping handle release
Power Paw®	Crevice wand	Dusting brush
(some models)
Filter		Lower cord wrap
Dust cup	Hose retainer
	Hose connector	Hose/floor suction control
		Lock button
Floor nozzle	‘Check brush roll’ light

Maintenance Schedule

Maintenance Schedule is also located on back side of dust cup.

!READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Make sure power switch is in OFF (O) position before plugging in power cord.

DUST CUP – Empty after each use

Standard filter

DCF10

HEPA filter DCF 10/14

		Align
		Top
Press ‘release cup’	Remove dust cup.	Twist lid
button.		counter-clockwise to open.
		Align
		Top
Lift off dust cup lid with	Empty dust cup.	Twist lid clockwise
attached filter.		to lock.

FILTER – Check regularly; clean as needed

Push filter latch to	Shake and brush dust	Snap filter back into lid.
remove filter.	and dirt from filter.

REPLACE FILTER – Replace within 3 - 6 months

Standard dust cup filter – DCF10	HEPA Filter DCF 10/14
	Choose HEPA for better filtration

2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com