HOW TO ASSEMBLE
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure on/off switch is in off position before plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Attach Handle
CAUTION: Do not catch cord under handle.
1 Groove
Groove
2
1.From rear of cleaner, align handle with groove and slide onto cleaner. If necessary, use thumb and finger pressure to slide handle into position.
2.Attach handle with two 1 inch screws in the assembly packet. Use either a slotted or Phillips® head screwdriver.
NOTE: Hand tighten with screwdriver to be sure both screws are firmly seated.
Step B Attach Hose
3
Button
Hole
4 |
Hose |
Hose Retainer |
3.From front of cleaner, insert hose adapter into opening on top of unit. Make sure the button on the hose adapter is secure in the hole on the unit.
4.From back of cleaner, insert the other end of the hose into the hose retainer.
5
