Eureka 4710 Series How to Identify Parts of Vacuum Cleaner, Maintenance Information, Brush Roll

How to Identify Parts of Vacuum Cleaner

Handle
Hose
Dust cup latch	Nested crevice
Filter screen & filter	tool & extension
	wand
Dust cup
Headlight	Power switch
(on some models)
Height adjustment knob	Handle release
Brush roll cover	Belt view window

SPECIAL FEATURES

Available on some models

Duster

chamber

Handle with

Power Paw®

Self-cleaning

duster

Upper cord

retainer Hose hook Power cord

	Dusting brush
	Carrying handle
Lower	& cord wrap
	Hose connector
cord
retainer	Lower cord wrap
	Hose retainer

Maintenance Information

Maintenance schedule is also located on back side of dust cup.

!READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Assemble the vacuum cleaner before using.

Screen

Filter

DCF 4/18

Brush Roll EXT-U Belt

DUST CUP – Empty after each use

Pull up latch and	Lift lever to release	Close bottom lid
remove dust cup.	bottom lid. Debris will empty.	until it clicks.

FILTER & SCREEN – Check regularly,clean as needed

Twist dust cup cover		Grasp filter;	Remove screen and
counter-clockwise.	turn clockwise.		rinse. Dry thoroughly.

Shake dust off filter.	Place screen	Align 3 tabs with cover;
Rinse; dry thoroughly.	over filter.	turn counter-clockwise.

FILTER DCF 4/18 – Replace within 6 months

Remove filter.	Place screen over	Line up cover
	new filter and install.	and lock.

BRUSH ROLL – Clean monthly

EXT-U BELT – Replace worn, cut or out of shape belt

2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com