Eureka 4770 series How to Use Accessories, Handle must be in upright position, Dusting Brush

Models: 4770 series

1 8
Download 8 pages 60.54 Kb
Page 5
Image 5
How to Use Accessories

How to Use Accessories

! Handle must be in upright position.!Telescopic Self-Cleaning Duster (on some models) Handle must be in upright position.

Replace hose end into vacuum base or duster chamber after using accessories.

Telescopic Self-Cleaning Duster (on some models)

Use for furniture, blinds, pictures and high-reach areas. Can be used in short or extended positions.

1) Activate duster suction: Turn vacuum on and push lever down for 10 seconds to clean duster.

2) Turn vacuum off and remove duster from cleaning chamber.

3) Short position: Dust low surfaces.

4) Extended position: Turn twist tabs to extend. Push firmly to collapse and turn to lock.

Crevice Tool and Extension Wand

Use for baseboards and corners.

1) Loosen end of hose.

2) Grasp crevice tool and wand near ridges and pull apart.

3) Turn ridge end to center.

4) Push crevice tool into wand and place on end of hose.

Dusting Brush

Use for furniture, drapes and vents. 1) Loosen end of hose.

2) Place dusting brush on end of hose, wand or crevice tool.

ENGLISH

Turbo Nozzle and Stair Hose

(with some models or available for purchase)

Use for furniture and stairs.

Make sure vacuum is below you, pushed against the bottom step.

1) If model has additional stair hose, attach to end of hose.

2) Attach turbo nozzle to the end of wand and hose.

Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com

3

Page 5
Image 5
Eureka 4770 series How to Use Accessories, Handle must be in upright position, Crevice Tool and Extension Wand, English