FujiFilm A600 owner manual Windows 98 / 98 SE / Me / 2000 Professional / Macintosh

Connecting to a PC

HPress w for about 1 second to turn the camera on in Playback mode.

When displaying “CHECKING USB”

If “CHECKING USB” appears and then [COMMUNICATION ERROR] is displayed on the LCD monitor, @DSC is not selected in USB MODE. Disconnect the USB cable (mini-B) to the camera and restart the procedure from step C.

CAUTION

•Always use the FUJIFILM AC Power Adapter AC-3VX (sold separately). If the camera suddenly loses power during data exchange, the xD-Picture Card or internal memory could be damaged.

•Do not disconnect the USB cable (mini-B) when the camera is communicating with a PC. If disconnecting the USB cable (mini-B) during communication, the files on the xD-Picture Card or internal memory may cause damage.

•In Mac OS X, you must set the automatic setup when the first time you connect the camera to your PC.

•Make sure that USB cable (mini-B) is connected correctly and pushed in.

•Perform pre-arranged steps to disconnect and turn off the camera (➝p.92).

•When the camera and PC are exchanging data, the self-timer lamp blinks and the indicator lamp blinks orange.

•Auto power off is disabled during USB connection.

•Before replacing the xD-Picture Card, always disconnect the camera from the PC. See p.92 for information on the disconnection procedure.

•The camera and PC may be exchanging data even when “Copying” disappears on your PC screen. Before disconnecting the USB cable (mini-B), always check that the indicator lamp lights green.

ISet a PC.

Windows 98 / 98 SE / Me / 2000 Professional / Macintosh

CAUTION

The Windows CD-ROM may also be required during installation. In this event, change CD-ROMs as directed by the on-screen instructions.

•FinePixViewer automatically starts up and the Save Image Wizard window (Save Image dialog box) appears. Follow the instructions provided on screen to save the images. To proceed without saving the images, click the [Cancel] button.

*Screen for Windows 98 SE

90