FujiFilm A600 owner manual Connecting to a PC

Connecting to a PC

By connecting the camera to a PC, your system can be expanded to fill a wide range of uses. Using “FinePixViewer” performs images saving, browsing and file management etc.

MEMO

If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the AC power adapter when connecting the camera to a PC.

Refer to Software Installation (➝p.83, 86) the first time you connect the camera to your PC.

Install the software first. Do not connect the camera to the PC before installing all the software.

AInsert the xD-Picture Card with images into the camera (➝p.17).

CAUTION

•Do not format the xD-Picture Card in the camera on the PC.

•Use the xD-Picture Card with images taken by a FUJIFILM Digital camera.

BPress w for about 1 second to turn the camera on in Playback mode.

CPress MENU/OK to open the SET-UP menu.

Refer to “Using the SET-UP menu” (➝p.69).

DSelect @DSC in L USB MODE in the SET-UP menu (➝p.71).

USB MODE

THIS MODE IS FOR

SENDING IMAGE DATA

TO PC.

DSC

PICTBRIDGE

SET CANCEL

EPress POWER to turn the camera off.

FTurn your PC on.

GConnect the camera to your PC using the USB cable (mini-B).

;USB socket (mini-B)

AC-3VX (sold separately)

Software Installation

Continued Q

89