Installation on a Mac OS X

Pre-installation checklist

ZHardware and software requirements

To run this software, you must have the hardware and software described below. Check your system before you begin the installation.

 

Power Macintosh G3 1, PowerBook G3

1,

Compatible Mac

*

*

Power Macintosh G4, iMac, iBook,

 

 

Power Macintosh G4 Cube, PowerBook G4, or Power Macintosh G5

Operating System

Mac OS X (compatible with version 10.2.8 to 10.4.3)

RAM

192 MB minimum

 

256 MB or better recommended

 

 

 

Hard disk space

Amount required for installation: 200 MB minimum

Amount required for operation: 400 MB minimum

 

Display

800 × 600 pixels or better, at least 32,000 colors

Internet connection*2

• To use the FinePix Internet Service or mail attachment function:

An Internet connection or e-mail transmission software is needed

 

• Connection speed: 56 k bps or better recommended

 

 

 

*1 Models with a USB port as a standard feature

*2 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet connection.

MEMO

Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not operate correctly if you use an extension cable or connect the camera via a USB hub.

Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the connection is faulty.

Additional USB interface board is not guaranteed.

86

Page 86
Image 86
FujiFilm A600 Installation on a Mac OS, ZHardware and software requirements, Compatible Mac, Internet connection*2