!
Change Light Bulb
Make sure vacuum is turned off and power cord is unplugged.
1)Lower handle to floor (Fig.1).
2)Unscrew the lens and remove old bulb. Replace with bulb rated 12 v., 10 w., Type 904.
3)Push in new bulb, replace lens cover and replace screw (Fig. 2).
Fig. 1 |
Fig. 2 | ENGLISH |
|
!
How to Clear a Blockage
Make sure vacuum is turned off and power cord is unplugged. Hose
1) Remove hose end from duster chamber (Fig. 3). Flex the hose to help loosen any blockage.
Hose Connector
1) Unclip sides and clear blockage in opening and hose (Fig. 4).
2) Clip back into place and
reconnect hose at both ends.
Fig. 3
Fig. 4 |
Base Hose
1)Remove 6 screws and brush roll cover (Fig 5).
2)Clear blockage from base hose (Fig. 6). Check for debris in brush roll and clean if needed.
3)Replace 6 screws and brush roll cover.
Fig. 5 |
Fig. 6 |
Eureka Customer Service HELPLINE | www.eureka.com 5 |
