1.
2.
5.
7.*
10.*
10
3.
4.
6. | Hose Suction |
| Control Button |
8.*
9.*
12.*
11.*
ENGLISH
INSTRUCTIONS FOR USE
•Before operating the vacuum cleaner, make certain that the dust bag and filters are in the proper position.
1Pull all of the power supply cord out from back of cleaner and plug into electrical outlet.
Note: When pulling on power supply cord watch for a yellow line on the cord. Then continue slowly pulling on cord till you see the red line, stop. The red line indicates the end of usable cord.
2Turn the ON/OFF suction control dial to switch the cleaner on.
3To rewind the power cord, press the rewind button with foot and guide the cord with hand to ensure that it does not whip causing damage.
2By moving the suction control dial, the suction power can be ad- justed.
4The suction control button on the hose handle is used to reduce suc- tion for delicate work such as cleaning drapes or picture frames.
HOW TO USE
Floors should be cleaned regularly over heavily traveled areas, and once a week over the entire area. Vacuum slowly, making several passes (for- ward and backward), covering small areas at a time. The time required to clean will depend on several factors - including type of floor and amount of dirt.
CLEANING TOOLS
5Combination Floor Turbo Nozzle: For carpets or hard surface floors.
6Hose Suction Control Button: For use to increase or decrease suction when using cleaning tools.
7Hard Floor Nozzle*: For any type of hard surface floor.
8Tool Caddy*: To store cleaning tools. Clips on wand.
9Combination Brush*: (stored on tool caddy on wand): For cur- tains, draperies, cushions, fabrics.
10Turbo Brush*: For upholstery and for stairs.
11Crevice Nozzle*: (stored on tool caddy on wand): For crevices, corners, baseboards, between cushions.
12Combination Crevice Nozzle/Brush*: (stored in base of unit under filter cover) For crevices, corners, baseboards, between cushions. Brush rotates to allow use as brush or crevice depending on task. *On some models.
* Depending on model
