How to use accessories
WAND 1
Before using accessories
1)Raise height adjustment to ‘high carpet.’
2)Turn air path selector knob to ‘tools.’
2-Position wand
Loosen wand and hose from back of vacuum.
•Push tool onto end of wand.
•For short wand, push hose release button to remove wand. Attach tool to end of hose.
CAU TI O N
When using tools, always place handle in upright position to raise vacuum to highest carpet setting. Brush roll will continue to turn when vacuum is turned on and handle is in upright position. Do not tilt vacuum forward while using tools. To avoid damage, do not set vacuum on carpet, carpeted stairs, furniture or fringed rugs when using tools.
OLS | F |
|
TO | L |
|
O | ||
|
| O |
|
| R |
|
| S |
ENGLISH
Crevice tool
Use for baseboards, corners and tight spaces.
Dusting brush
Use for furniture, drapes and vents.
Turbo nozzle
(with some models or available for purchase)
Use for furniture and stairs.
Bare floor nozzle and wand
(with some models or available for purchase)
Use for hard surfaces.
Stair hose
DNA1
W
DNA1
W
W DNA2
| (with some models or available for purchase) |
|
|
| Make sure vacuum is below you, |
|
|
| pushed against the bottom step. |
|
|
| 1) Attach stair hose to end of hose |
|
|
| or wand. |
|
|
! | 2) Attach turbo nozzle to end of |
|
|
stair hose. |
|
| |
|
|
| |
| NOTE: Hose length can be increased by |
|
|
| releasing the hose from the hose retainer |
|
|
| on back of unit. Reposition hose inside |
|
|
| hose retainer after using accessories. |
|
|
Eureka Customer Service HELPLINE | www.eureka.com | 3 | |
