Eureka AS1001A How to use accessories, Position wand, Dusting brush, Crevice tool, Turbo nozzle

How to use accessories

WAND 1

Before using accessories CAU TI O N

	• Pull out cord to desired length. Do not pull	When using tools, always place handle in upright
	past red line (Fig.1). Push cord into cord clip.
	• Move brush roll lever to off position and put	position and move brush roll lever to off position.
	vacuum in an upright position (Fig. 2).					ENGLISH
	(wand 2 on some models or available for purchase)
	• Turn air path selector knob to ‘tools’ (Fig. 3).
	• When finished vacuuming, press switch to
	retract cord (Fig. 4).
	2-Position wand
	Loosen wand and hose from vacuum.
	• Push tool onto end of wand (Fig. 5).	Fig.1				Fig.2
	• Short wand: Push hose release button to
	remove wand 1. Attach tool to end of hose.
WAND	• Longer wand: Slide off wand 2 and turn over,
2
	then push opposite end onto wand 1.			S	FL
			L
		O			O
		TO
						O
						R
						S
	Dusting brush
	Use for furniture, drapes and vents.
	Crevice tool	Fig.3				Fig.4

Use for baseboards, corners and tight spaces.

Turbo nozzle

(on some models or available for purchase)

Use for furniture and stairs.

Stair hose

(on some models or available for purchase)

		DNA W	1
	DNA W	1		DNA W	2
			Wand 1
DNA W	1		2	WAN D
Fig.5			Wand 2 (on some models)

!	Make sure vacuum is below you,
	pushed against the bottom step.
	• Attach stair hose to end of hose
	or wand.
	• Attach turbo nozzle to end of
	stair hose.
	NOTE: Hose length can be increased by
	releasing the hose from the hose retainer
	on back of unit. Reposition hose inside
	hose retainer after using accessories.
Eureka Customer Service HELPLINE 1-800-282-2886		www.eureka.com	3