!Check type S belt. Replace if worn, cut or out of shape

Allow unit to cool completely before servicing.

• Remove 4 screws from vacuum cover.

 

Lift off cover (Fig. 1).

 

• Push up gray latch to release; lift up belt

 

cover (Fig. 2).

 

• Remove old belt from wheel first, then

 

from motor shaft (Fig. 3).

 

• Place new belt around motor shaft; pull

 

to loop over top of wheel (Fig. 4).

Fig.1

• Rotate wheel and belt toward vacuum front to center belt on wheel (Fig. 5).

• Push firmly on belt cover until it clicks. Replace vacuum cover and 4 screws (Fig. 6).

NOT

IC E

 

To view our instructional video, please visit

 

www.eureka.com

Fig.4

 

 

Fig.2

Fig.5

Fig.3

Fig.6

ENGLISH

How to maintain turbo nozzle (on some models)

• Turn nozzle onto back side. Remove 1 screw.

• Rotate lower part of cover down over brush and lift off cover.

• Clear blockage from brush roll area. Use scissors to clip threads or hair.

• Place cover back into position. Tighten screw.

The Eureka limited warranty

Eureka warrants this vacuum cleaner to be free from defects in material and workmanship for a

USA: 1-800-282-2886

Mexico: (55) 5343-4384

Canada: 1-800-282-2886

term of three years for normal household use. Warranty is granted only to the original purchaser and

Electrolux Home Care

Electrolux Home Care

Electrolux Home Care

North America Service Division

 

North America Service Division

members of immediate household.

 

P.O. Box 3900

 

5855 Terry Fox Way

This warranty is good for three years from the date of purchase only when the vacuum cleaner is

Peoria, IL 61612

 

Mississauga, Ontario L5V 3E4

 

 

 

used in the accordance with Eureka operating instructions.

Obtaining warranty service outside your community

This warranty does not cover

You must pay the shipping charges to the Eureka Authorized Warranty Station. Return Shipping

• Parts of the vacuum that require replacement under normal use such as disposable dust

Charges will be paid by the Warranty Station. When returning parts for repair, please include the

model, type and serial number located on the rating plate on the lower backside of the vacuum.

bags, filters, drive belts, light bulbs, brush roll, bristles, impellers and cleaning.

Further limitations and exclusions

 

• Damages or malfunctions caused by negligence, abuse, and use not in accordance with

 

Any warranty that may be implied in connection with your purchase or use of the vacuum, including

the Owner’s Guide.

any warranty of Merchantability or any warranty for Fitness For A Particular Purpose is limited to the

 

• Defects or damages caused by unauthorized service or the use of other than Genuine

duration of this warranty.Some states do not allow limitations on how long an implied warranty lasts,

Eureka, ARM & HAMMERTM and FiltreteTM by 3M parts.

so the above limitations may not apply to you.Your relief for the breach of this warranty is limited to

What Eureka will do

the relief expressly provided above. In no event shall the manufacturer be liable for any

consequential or incidental damages you may incur in connection with your purchase or use of the

Eureka will, at its option, repair or replace a defective vacuum or vacuum part that is covered by this

vacuum. Some states do not allow the exclusion or limitation of incidental or consequential

warranty. As a matter of warranty policy, Eureka will not refund the consumer’s purchase price.

damages, so the above limitation or exclusion may not apply to you.

Obtaining warranty service

This warranty gives you specific legal rights.You may also have other rights, which may vary by

state.

 

 

To obtain warranty service you must return the vacuum or vacuum part along with “proof of

 

 

 

 

 

purchase” to any Eureka Authorized Warranty Station. For Eureka Authorized Warranty Station

The ARM & HAMMER name is a trademark of Church and Dwight Co., Inc. 3M and Filtrete are

or Service Information, visit www.eureka.com, write or telephone toll free:

trademarks of 3M Company, used by Electrolux Home Care Products, Inc. under license.

Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com

5

Page 7
Image 7
Eureka AS1001A manual Allow unit to cool completely before servicing, Place cover back into position. Tighten screw