Eureka AS1100-1109 quick start Quick Start Guide, Easy assembly, How to use and clean your vacuum

QUICK START GUIDE

THANK YOU FOR PURCHASING YOUR NEW EUREKA VACUUM!

Please take a few moments to read this Quick Start Guide. It is designed to help you assemble your vacuum easily.

To view our “How to Assemble” demo, visit www.eureka.com/suctionseal/assembly

If you have questions about your new vacuum, please contact our customer service helpline at 1-800-282-2886. We’re here to help!

Helpline Hours:

8 a.m. to 7:30 p.m. (CST), Monday - Friday

10 a.m. to 6:30 p.m. (CST), Saturday - Sunday

AS1100-1109 Series

With cord rewind

STEP

1

No screws or tools required!

What’s in the carton

	R’S
NE
OW
GUIDE

Dust cup

Important Safeguards

WAND 1Hose

Dusting Crevice

brush tool

Wand 1

Turbo holder

SPECIAL FEATURESAvailable on some modelsTurbo nozzle

Turbo

WANDcover

2

Wand 2

Stair Hose

Vacuum cleaner Handle Carry handle Lower hose retainer

STEP2 Easy assembly

1 2

Follow 1-11

in order

to ensure proper assembly.

PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. ! Moving parts! Assemble the vacuum cleaner before using.

3	4
	C

Lock!

B

Snap!

D

Snap!

A

Snap!

5

Remove dust cup	Place handle on
to assemble vacuum.	vacuum; push down
	to snap in place.

Slide carry handle into back of	Insert top tab A turbo holder into handle. Place thumbs on each side	Place lower hose retainer
handle. Snap into place.	and snap bottom corners B into place. Turn C knob to lock.	in slots on back of vacuum.
	Store turbo nozzle in holder. Some models: Snap D turbo cover	Push down to snap into place.
	straight on from front to back.

6

To install hose connector,

align tab at right and

snap on at left.

7

Pull out bottom of lower hose retainer and position hose.

8

Place hose over

carry handle.

9

WAND

1

WAND

2

Some models:

Slip wand 2 over wand 1.

10

Push wand 1 onto end of hose. Place over bottom hook; snap in at top.

11

Store dusting brush and crevice tool on backof vacuum. Store turbo nozzle in holder

(tools vary by model).

STEP

3

Power switch is marked

Ifor on-off.

!

Empty dust cup after each use.

How to use and clean your vacuum

Air path knob

			S	F
		L
	O
O				L
T					O
						O
						R
						S

Pull out cord to desired length.			To vacuum floors, turn	Use foot to adjust height for	Brush roll on/off lever:	Step on power switch to turn		Step on handle release to
Do not pull past red line; push			air path knob to ‘floors.’	carpet or bare floors.	Turn brush roll lever on for	on; step on again to turn off.		lower handle into position.
cord into cord clip.					carpet; turn brush roll lever
					off for bare floors and tools.
Air path
knob						Was	hable
S	F
OL
TO	L
		OO
		RS

Attach tool to end of wand.	Press switch to rewind cord.	Remove dust cup; press lever	Pull filter latch to release cover. Lift out foam filter and shake off dust.
Turn air path knob to ‘tools.’		to release bottom lid.	Lift out filter tube with screen; shake off dust. Reinstall filters and close cover.