How to maintain turbo nozzle | Eureka AS3100 instruction

How to maintain turbo nozzle

1	Turn nozzle onto
	back side. Remove
	1 screw.

Rotate lower part of

2 cover down over brush and lift off cover.

Clear blockage from

3 brush roll area. Use scissors to clip threads or hair.

4	Place cover back
	into position.
	Tighten screw.

How to maintain brush roll

C A U T I O N

Make sure vacuum is turned off and power cord is unplugged.

How to clean brush roll

• Check brush roll periodically and remove debris.

• Step on handle release to lower handle (Fig. 1).

• Turn vacuum face down on floor.

• Use scissors to clip threads or hair (Fig. 2).

1

2

Eureka Customer Service HELPLINE 1-800-282-2886	www.eureka.com	11

Image 11

Eureka AS3100 manual How to maintain turbo nozzle, How to maintain brush roll, How to clean brush roll

Contents

Thank you for purchasing your new Eureka vacuum Contents Where to find important vacuum information Important Safeguards OW E What comes in the carton Front View Back How to assemble your vacuum cleaner Some models How to identify parts of your vacuum cleaner Dust cup Empty after each use Filter maintenance instructions Empty dust cup after every use How to use your vacuum cleaner Turbo nozzle How to use accessoriesDusting brush Cr vice tool Make sure vacuum is turned off and power cord is unplugged How to clear a blockage How to clean brush roll How to maintain turbo nozzleHow to maintain brush roll How to replace brush roll or belt No suction at Problem Solution Motor will not startVacuum does not clean Carpet or bare floor USA Mexico 55 Canada Eureka limited warranty Eureka Customer Service Helpline