OPERATING INSTRUCTIONS

MYSTIQUE® LED LIGHTING (OPTIONAL)

The Mystique LED lighting system allows you to brighten up your spa experience through different multi-colored lights: blue, aqua, green, amber, red, and magenta. You can choose one stationary color or you can cycle through all the colors with the automatic color wheel.

To install Mystique LED lighting system, you will need to contact your Caldera Dealer.

To activate, press the “SET” button, then the “LIGHT” button on the control panel. The LIGHT icon will flash once color wheel is active. To select a specific color, push the “LIGHT” button (within 5 seconds) while the desired color is displayed. If 5 seconds have passed after color wheel activation, you will need to press “SET”, then “LIGHT” to select a specfic color. The Mystique LED lighting option is a great way to personalize your spa experience.

LOCK FEATURES

The locking features, TEMPERATURE LOCK and SPA LOCK, are enabled from the control panel by a specific combination of buttons. Once enabled, a lock will remain active until the specific button combination is applied to disable the lock. Even if power is disconnected from the spa and soon thereafter reapplied (such as a power outage), the lock will remain in place.

SPA LOCK

The Spa Lock feature deactivates all of the functions of the control panel. It is generally used to prevent unwanted use of the spa. To activate the Spa Lock, press “SET” button then “TEMP ▼” button. The word “SLOC” in the display will confirm activation.

To deactivate the Spa Lock, press “SET” button then “TEMP ▼” button. At this point, the “SLOC” will no longer be illuminated in the display.

TEMPERATURE LOCK

The Temperature Lock feature deactivates the temperature control function from the control panel. All other functions on the control panel will operate normally. Temperature Lock is most often used by those who do not want others to change the set temperature of the spa water.

To activate the Temperature Lock, press “SET” button then “TEMP ▲ “ button. The word “TLOC” in the display will confirm activation.

To deactivate the Temperature Lock, press “SET” button then “TEMP ▲ “ button. At this point, the “TLOC” will no longer be illuminated in the display.

FILTER CYCLES

Your spa will automatically turn the filter cycle on twice each day. When the spa is first powered up the automatic filter cycle will wait 10 minutes before

starting. A 1.5 hour filter cycle using the low speed of the jet pump is the programmed default filter cycle time. The display will read 1:30. The filter

cycle occurs twice a day (every 12 hours).

NOTE: The optional Monarch® and PureWaterTM ozone systems only work during the filter cycles.

To modify the length of either filter cycle:

A.Press and hold the “SET” button for approximately three seconds (The filtration ion will flash during programming).

B.Press the “LIGHT” button to select the Filter Cycle 1 or 2 (a F1 or F2 will flash in the display). NOTE: Each filter cycle can be set independently.

C.Using the TEMP ▲ or the TEMP ▼ button, adjust the length of filtering time desired (0 to 6 hours).

D.Programing will then be saved 10 seconds after the last button is pushed.

The filter cycle will activate the low speed of the jet pump for the entire cycle. When activated, the filter cycle icon on the display is turned on. If the temperature exceeds the set point by three degrees F for more than three hours, the system will cancel the FILTER cycle and the filter cycle icon will blink for the remaining filter cycle time. Should the temperature cool down to 1.5 degrees F within the set point before the end of the cycle, the cycle will resume for the rest of the time. Should you use the spa during the filter cycle by placing the jet pump on high speed, the filter cycle icon will blink. Once the jet pump has been shut off, a ten minute tranquil mode begins (filter cycle icon will be blinking during tranquil mode) before the filter cycle will resume. The blinking filter cycle icon indicates that the filter cycle timer is still counting, but the cycle has been temporarily interrupted.

NOTE: The interrupted time of a filter cycle is not extended after the filter cycle resumes. Power interruptions of the spa will reset the filter cycle to the default 1.5 hour cycle time and begin 10 minutes after spa regains power.

OPERATION NOTE: For proper water-circulation during filtration cycles, rotate the air control valves counterclockwise to the off position.

MANUAL CLEAN CYCLE

The clean-up cycle operates in the following manner: Jet pump 1 runs for ten minutes on high speed.

This system is initiated by pressing the “SET” button, then “JETS” button. The Filter and Jets icon will flash.

11

Page 13 Page 15
Page 14
Image 14
Caldera Highland Series Mystique LED Lighting Optional, Lock Features, SPA Lock, Temperature Lock, Filter Cycles
Page 13 Page 15

Highland Series specifications

The Caldera Highland Series is an exceptional line of outdoor gear designed specifically for adventurers who seek the perfect blend of performance, comfort, and durability. Crafted with a deep understanding of the challenges faced in various environments, this series stands out for its innovative technologies and user-centric features.

One of the hallmark characteristics of the Caldera Highland Series is its use of advanced waterproof yet breathable materials. The outer fabric is engineered with a cutting-edge membrane that effectively repels water, keeping the user dry in unexpected downpours. Furthermore, this membrane allows moisture from within to escape, ensuring that wearers remain comfortable during intense physical activity. This feature is invaluable for those trekking through diverse climates, providing both protection and breathability.

In addition to weather resistance, the Highland Series includes an innovative insulation technology. Utilizing lightweight yet efficient insulation means that users can stay warm without the bulk associated with traditional outerwear. This is particularly important for those who prioritize both warmth and mobility during outdoor excursions. Designed for layering, the Highland Series garments fit seamlessly with other layers, enhancing versatility for various conditions.

Another notable aspect of the Caldera Highland Series is its attention to detail in design. The garments boast articulated joints and ergonomic cuts, allowing for an unrestricted range of motion. This design philosophy is particularly beneficial for climbers, hikers, and skiers who need gear that moves with them rather than against them.

Additionally, the series embraces sustainability, incorporating recycled and eco-friendly materials into its production processes. By prioritizing responsible manufacturing practices, Caldera not only focuses on performance but also on environmental stewardship, appealing to the growing number of eco-conscious consumers.

Finally, the Highland Series is equipped with strategic pocket placements and functional features such as adjustable hoods and cuffs, ensuring practicality without sacrificing style. With a focus on performance-driven functionality, durable craftsmanship, and a commitment to sustainability, the Caldera Highland Series offers outdoor enthusiasts a premier choice for their adventures, no matter where the journey leads. Whether hiking rugged trails or navigating snowy slopes, this series equips you with the reliability and comfort needed to conquer the great outdoors.
Top Page Image Contents