Filter maintenance instructions | Eureka AS3100 specification

Filter maintenance instructions

Dust cup – Empty after each use

Belt – Check regularly

Press lever to release bottom lid. Debris	For belt change instructions,
will empty. Close lid until it clicks.	go to page 12.

Pull latch to lift up cover. Lift out foam filter and filter screen; shake off dust.

Rinse foam filter, screen and dust cup. Dry all thoroughly.

Align tabs on filter screen with slots on back of cup. Drop into position. Reinstall foam filter and close cover. Warning: Filters and screen must be positioned properly for cover to lock.

	Remove dust cup. Twist filter cover counter-clockwise and lift off. Replace
	exhaust filter and cover. Turn to lock and snap dust cup back into place.
	Exhaust filter cover must be in place at all times.
	Brush roll – Clean monthly		7
	Eureka Customer Service HELPLINE 1-800-282-2886	www.eureka.com	7
	Eureka Customer Service HELPLINE 1-800-282-2886	www.eureka.com

Image 7

Eureka AS3100 manual Filter maintenance instructions, Dust cup Empty after each use

Contents

Thank you for purchasing your new Eureka vacuum Contents Where to find important vacuum information Important Safeguards OW E What comes in the carton Front View Back How to assemble your vacuum cleaner Some models How to identify parts of your vacuum cleaner Dust cup Empty after each use Filter maintenance instructions Empty dust cup after every use How to use your vacuum cleaner Turbo nozzle How to use accessoriesDusting brush Cr vice tool Make sure vacuum is turned off and power cord is unplugged How to clear a blockage How to maintain brush roll How to maintain turbo nozzleHow to clean brush roll How to replace brush roll or belt No suction at Problem Solution Motor will not startVacuum does not clean Carpet or bare floor USA Mexico 55 Canada Eureka limited warranty Eureka Customer Service Helpline