Panasonic H0608VC0, RQT9223-Y warranty Troubleshooting guide / Maintenance Reference

		Pages
There is a lot of noise when	• Try changing the BEAT PROOF mode.	49
listening to AM.
The correct FM frequency	• Change the frequency step to suit your area when FM is selected.	49
cannot be tuned in.
	• Should you be playing a chapter on a DVD etc.:
When using an HDMI	– Change the audio output setting on the Blu-ray Disc/DVD player or	–
	DVD recorder from “Bitstream” to “PCM”. (6.1-channel sources will
connection, the first few
	however be played as 5.1-channel.)
seconds of sound is cut off.
	– Select “PCM ” as instructed in “Setting input signals” when you play	39
	2-channel stereo sources.
	• The unit does not work properly when wrong cords are in HDMI input and	12, 13, 16
The unit does not work properly.	output terminals. Turn the unit off, unplug the AC power supply cord, and
	make connections again.
	• Confirm “Setting VIERA Link to “OFF ”” is set to “ON ”. When it is “OFF ”,	40
	change to “ON ”.	40
	• VIERA Link does not function in power saving standby mode when this
	unit is turned off. See “Reducing standby power consumption (power save
	mode)” and set to “ON ” (normal power consumption).	–
	• Check VIERA Link settings of the connected equipment.
	• VIERA Link may not function when you change the connections for HDMI	–
VIERA Link does not function	equipment, insert and remove the outlet, or during blackout. Do the
	following operations in this case.
properly.
	– Turn the TV (VIERA) on again while all the equipment connected with
	HDMI cables are on.
	– Set “VIERA Link (HDMI equipment control)” of TV (VIERA) to “OFF” and
	then set to “ON” again. (For details, refer to the operating instructions for
	TV (VIERA).)
	– Connect this unit to TV (VIERA) using the HDMI cable, switch the TV
	(VIERA) on, unplug this unit’s AC power supply cord, and insert it into a
	household AC outlet again.
When more than one piece
of equipment are connected	• Some of the linked operations apply to the connected equipment that is	–
to HDMI input terminal, some	VIERA Link compatible. To prevent this, set the connected equipment (DVD
of them turn on and off	recorder (DIGA) and others) against VIERA Link.
automatically.
The remote control doesn’t work.	• Replace the batteries if they are worn.	7
Other products respond to the	• Change this unit’s remote control mode to “REMOTE 2 ”.	42
remote control.

Maintenance

Unplug the AC power supply cord from the household AC outlet and wipe the unit using a soft and dry cloth.

•When the unit is very dirty, wring the cloth soaked in water thoroughly, wipe the dirt and wipe moisture off with a dry cloth.

•Do not use solvents such as benzine, thinner, alcohol, etc. because they may cause casing to deform and coating to go off.

•Before using chemically treated cloth, read the instructions that come with the cloth carefully.

Troubleshooting guide / Maintenance Reference

55

RQT9223