![Changing the input settings](/images/new-backgrounds/11163/1116377x1.webp)
Changing the input settings
You cannot assign one selector to the same type of two or more terminals. In this case, the selector set last becomes effective.
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “IN ASSIGN ”, and press [OK] to confirm.
3.Press [e][r] to select the type of input
terminal, and press [OK] to confirm.
HDMI3 (HDMI input 3), OPT1 (Optical input 1), OPT2 (Optical input 2), OPT3 (Optical input 3),
COAX (Coaxial input), CMPV3 (Component Video input 3)
HDMI1, HDMI2, CMPV1 and CMPV2 are fixed to equipment beforehand and you cannot change the setting.
4. Press [e][r] to select the selector to assign, and press [OK] to confirm.
Allocatable selector:
HDMI3 : CBL (Cable box/Satellite receiver), GAME
OPT1, OPT2, OPT3, COAX : DVR (DVD recorder), BD P
CBL, GAME, CD, TV
CMPV3 : CBL, GAME, VCR Factory setting:
HDMI3 : CBL, OPT1 : DVR, OPT2 : BD P, OPT3 : TV,
COAX : CD, CMPV3 : CBL
Repeat steps 3 and 4 to change setting.
5. To finish the setting (➔ page 36)
Setting the placement positions for surround speakers
Set the positions for surround speakers during
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “7.1CH VS ”, and press [OK] to confirm.
3.Press [e][r] to select setting, and press [OK]
to confirm.
OFF :When
SIDE SPK : When the surround speakers are placed almost next to the
REAR SPK : When the surround speakers are placed at the back of the
Factory setting : SIDE SPK
4. To finish the setting (➔ page 36)
Setting wireless speakers
Selecting the use of wireless speakers as surround speakers or multi room speakers when connecting
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “WIRELESS ”, and press [OK] to confirm.
3.Press [e][r] to select the setting, and press
[OK] to confirm.
MULTI ROOM : When enjoying music in another room using the wireless speakers
SURR SPKR : When using the wireless speakers as surround left and right speakers
Factory setting: SURR SPKR
4. To finish the setting (➔ page 36)
Note
• See page 27 for more details.
Setting input signals
Most sources can be played with “AUTO ” (factory setting). However, in the following cases, change the input signal detection setting.
•When the beginning of the song is cut during playback of CD, set to “PCM ” (PCM FIX).
•You can fix the signal type (digital, analog or PCM) supplied by such equipment as the DVD recorder and the
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “INPUT MODE ”, and press [OK] to confirm.
3.Press [e][r] to select a desired digital
input terminal, and press [OK] to confirm.
TV, CBL (Cable box/Satellite receiver), DVR (DVD recorder), BD P
4. Press [e][r] to select the method for | Operations | |
identifying input signals, and press [OK] | ||
| ||
to confirm. |
| |
AUTO : Automatic detection (Taking priority in order of |
| |
HDMI, OPTICAL, COAXIAL) |
| |
ANLG : Fixes the input signal to analog |
| |
DIG : Fixes the input signal to digital |
| |
PCM : PCM (from CDs) digital input fixed | menu | |
Factory setting: AUTO | ||
5. To finish the setting (➔ page 36) | ||
Repeat steps 3 and 4 to change setting. |
| |
• When “CBL ”, “GAME ”, “TV ” and “CD ” are not assigned to | setup | |
• “DIGITAL INPUT” stays on the display when you fix the input | ||
the digital terminal such as HDMI, OPTICAL and COAXIAL |
| |
(➔ left), only “AUTO ” and “ANLG ” can be selected. |
| |
signal as digital. | the | |
• “PCM” always appears on the display when PCM FIX is set. | ||
| ||
• “PCM FIX ” flashes on the display when the unit is in the PCM | Using | |
FIX mode and a | ||
| ||
connections (optical, coaxial). |
| |
Adjusting input levels for external |
| |
terminals |
|
Make this setting when you feel the volume of the equipment connected to external terminals is low.
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “AUX LEVEL ”, and press [OK] to confirm.
3.Press [e][r] to select the input level, and
press [OK] to confirm.
LEVEL LOW : Normal volume setting
LEVEL HIGH : Setting when you want to raise the volume
Factory setting: LEVEL LOW
•Make this setting when you feel the volume of the equipment connected to external terminals is low.
4.To finish the setting (➔ page 36)
39
RQT9223