Panasonic H0608VC0, RQT9223-Y warranty Remote controlling a DVD recorder

Models: RQT9223 H0608VC0 RQT9223-Y

1 60
Download 60 pages 32.53 Kb
Page 43
Image 43
Remote controlling a DVD recorder

Remote controlling a DVD recorder

Aim the remote control at the equipment you wish to operate.

ENTER

SUB MENUManual backgroundManual backgroundManual backgroundManual background

S

Manual background When operating a Panasonic DVD recorder using the supplied remote control

Change the control setting on the supplied remote control to match the DVD recorder’s remote control mode.

Confirm the DVD recorder’s remote control mode in its operating instructions.

1.Press [DVD RECORDER].

2.Press and hold [OK] together with [1], [2] or [3] for 2 seconds or longer.

[Mode 1], [Mode 2], or [Mode 3] is set on the remote control according to the pressed button.

The factory setting is [Mode 1].

Manual background When DVD recorder drives do not switch

The condition may mean the DVD recorder does not recognize the signal this unit’s remote control transmits.

Switch the drives again after changing the signal in the following procedure.

1.Press [DVD RECORDER].

2.Press and hold [OK] together with [8] for 2 seconds or longer.

To return: In step 2 above, press and hold [OK] together with [9] for 2 seconds or longer.

Note

When you operate a DVD recorder with built-in VCR, press [DRIVE SELECT] to select a choice other than VCR.

Do not forget to press this

To switch the unit’s input to “DVD R.

To switch the remote control to the DVD

before operating a DVD

recorder operation mode

recorder.

 

 

 

 

To turn the DVD recorder on or off

To start playback

To skip a track or chapter

To search through the disc

To play in slow-motion

To show the direct navigator (or the top menu)

SUB MENU

To show a sub menu

S

To show the FUNCTIONS window (while stopped)

To return to the previous screen

To select an item

• Press to select after pressing [DIRECT NAVIGATOR, TOP MENU], [SUB MENU], or [FUNCTIONS].

To confirm the selected item

To select a track or chapter directly

• Some of the models require you to press [OK] to confirm after pressing numbered buttons.

To select a channel

• When you select a channel directly.

ENTER

To pause

To move forward or backward frame by frame

To switch DVD recorder drives (HDD, DVD and

SD drive etc.)

To select a channel

• When you make a selection in rising or falling order.

To stop playback

Remote controlling a TV or DVD recorder etc. Operations

43

RQT9223

Page 43
Image 43
Panasonic H0608VC0, RQT9223-Y warranty Remote controlling a DVD recorder