Panasonic RQT9223 Sound, Balancing front speaker volume, Changing the audio output Dual program

Balancing front speaker volume

You can adjust the balance of the front speakers.

1.Press [SOUND MENU] to enter the sound menu.

2.Press [e][r] to select “BALANCE ”, and press [OK] to confirm.

3.Press [w][q] for adjustment, and press [OK] to confirm.

How speakers are displayed

L : Front left, R : Front right

You can adjust the balance by moving the bar on the screen left and right.

•As the bar on the screen approaches “L ”, the audio output from speakers balances front left.

•As the bar on the screen approaches “R ”, the audio output from speakers balances front right.

4.Press [SOUND MENU] to select “EXIT ”, and press [OK] to finish the setting.

Press [RETURN] to return to the previous display or to cancel the setup in the halfway.

Note

•The bar shows the current balance of the front speakers.

•You cannot use this function when both “ A ” and “ B ” are off.

Changing the audio output (Dual program)

You can select audio output mode when playing back dual audio sources.

•You can check the dual audio status on the display (➔ page 31).

1.Press [SOUND MENU] to enter the sound menu.

2.Press [e][r] to select “DUAL ”, and press [OK] to confirm.

3.Press [e][r] to select an audio mode, and press [OK] to confirm.

MAIN : Main audio output

SAP : Sub channel audio output

M+S : Main and sub channel audio output

Factory setting: MAIN

4.Press [SOUND MENU] to select “EXIT ”, and press [OK] to finish the setting.

Press [RETURN] to return to the previous display or to cancel the setup in the halfway.

Listening clearly at low volume

This function compresses the dynamic range of Dolby Digital contents.

Without affecting the sound field, the function makes spoken lines easier to catch at low volume by reducing the difference between the maximum and minimum sounds created by audio signals. This convenient function allows you to enjoy commercial sources late at night when you cannot produce big sounds.

1.Press [SOUND MENU] to enter the sound menu.

2.Press [e][r] to select “DRCOMP ”, and press [OK] to confirm.

3.Press [e][r] to select a mode and press

[OK].

OFF :
The software is played with the original dynamic range.	Operations
STANDARD :
The level recommended for household viewing
MAX :
The maximum allowable compression (recommended for
night viewing)
Factory setting: OFF
4. Press [SOUND MENU] to select “EXIT ”,	menu
and press [OK] to finish the setting.
Press [RETURN] to return to the previous display or	sound
• This function does not work when transmitted signal
to cancel the setup in the halfway.
Note
information does not support it.	the
Using whisper mode surround	Using
This function is effective only during surround playback.
This function enables the surround playback to be effective
even when the volume is very low.

1.Press [SOUND MENU] to enter the sound menu.

2.Press [e][r] to select “W. S. ”, and press [OK] to confirm.

3.Press [e][r] to select “ON ”, and press

[OK] to confirm.

OFF : For not using whisper mode surround

ON : For using whisper mode surround

Factory setting: OFF

4.Press [SOUND MENU] to select “EXIT ”, and press [OK] to finish the setting.

Press [RETURN] to return to the previous display or to cancel the setup in the halfway.

Note

• This function is effective when Dolby Pro Logic , NEO:6 or SFC is activated with 2-channel source input.

•This function cannot be used when SPEAKERS A is turned off.

35

RQT9223