Panasonic H0608VC0 Convenient functions, Adjusting speaker volumes, Displaying the current status

Convenient functions

Adjusting speaker volumes

Adjust speaker output to balance front speaker sounds with those from each of the other speakers in the seating area.

• Press [SPEAKERS A] on the unit to switch “ A ” on.

• Press [SPEAKERS A] or [SPEAKERS B] to switch “ A B ” on when bi-wire speakers are connected.

(If you select “SPEAKERS B” only, the test signal will not be output.)

ENTER

SUB MENU

S

TV/VIDEO

1. Press [INPUT SELECTOR] to select an input source which is not connected.

• Or stop the playback of connected equipment.

2. Press [VOL					+, –] to adjust the volume range
between –30dB and –35dB.
3. Press [–AUTO, TEST].							LS	SUBW speaker)		Operations
L	C		R		RS	SB
• Speakers are displayed in the following order.
L	C	R		RS	SBR	SBL	LS	SUBW or
									(If you connect one surround back

• Connected speakers output the test signal.

How speakers are displayed			functions
L : Front left, C : Center, R : Front right , RS : Surround right, SBR : Surround back
right, SBL : Surround back left, SB : Surround back (If you connect one surround
back speaker), LS : Surround left, SUBW : Subwoofer
4. Press [e] [r] to adjust the speaker volume when the test			Convenient
signal is being output from the speaker to adjust.
• To shift the test signal output to next speaker, press [q].
Adjustment range: –20 dB to +10 dB
Factory setting: 0 dB
SUBW only:
MIN (minimum), 1 to 29, MAX (maximum)			/
Factory setting: 20
			effects
6. Lower the volume to the normal listening level using
5. Press [–AUTO, TEST] to finish.
[VOL	+, –].		sound
Note
• The front speakers cannot be adjusted with this operation. To adjust the front speaker			controlling
Press [MUTING].
volumes, press [VOL		+, –].
• To adjust the volume balance of left and right front speakers, see “Balancing front speaker
volume” (➔ page 35).
Silencing speakers temporarily
• “MUTING ” flashes while muting is activated.			Remote
• Press the button again to cancel the operation.
• Muting is cancelled when you turn the unit off or adjust the volume.
Displaying the current status

1.Press [INPUT SELECTOR].

2.Press [DISPLAY].

•The sound volume, SFC setting and Digital input (terminal name/format) scroll in turn across the display.

•When the unit is receiving a dual audio signal, the reception status is displayed (➔ page 35).

• Preset channel number is also displayed when the preset channel is tuned (➔ page 48).	31
• When you press [DISPLAY] halfway in this process, the next item to the current display appears.
	RQT9223