Using the setup menu
Reducing standby power consumption (power save mode)
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “HDMI ”, and press [OK] to confirm.
3.Press [e][r] to select “STNBY ”, and press [OK] to confirm.
4.Press [e][r] to select “OFF ”, and press
[OK] to confirm.
OFF : When you wish to reduce standby power consumption
ON : When you activate the standby through function
(➔ page 13) (standby power consumption becomes 0.8 W in this setting)
Note
When you select “OFF ”, the followings become applicable.
•Standby power consumption becomes 0.4 W.
– Standby through with HDMI connections does not work.
•VIERA Link (➔ pages 32 and 33) is cancelled when the
unit is off. Factory setting: ON
5. To finish the setting (➔ page 36)
Setting VIERA Link to “OFF”
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “HDMI ”, and press [OK] to confirm.
3.Press [e][r] to select “CTRL ”, and press [OK] to confirm.
4.Press [e][r] to select “OFF ”, and press
[OK] to confirm.
OFF : When you do not use VIERA Link function
ON : When you use VIERA Link function
Factory setting: ON
5. To finish the setting (➔ page 36)
Switching the attenuator
Switch the attenuator “ON ” when sounds become distorted while playing an analog input source.
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “ATTENUATOR ”, and press [OK] to confirm.
3.Press [e][r] to select “ON ”, and press
[OK] to confirm.
OFF : For switching the attenuator off
ON : For switching the attenuator on
Factory setting: OFF
4. To finish the setting (➔ page 36)
Adjusting the time lag by delaying audio output when pictures on TV arrives after sounds
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “SOUND DLY ”, and press [OK] to confirm.
3.Press [e][r] to select the setting, and
press [OK] to confirm.
AUTO, OFF, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, 180,
200(msec)
Factory setting: AUTO
Note
•“AUTO ” can only be effective when connecting the unit to an HDAVI Control 3 compatible Panasonic TV (VIERA) (➔ page 32).
•When connecting the unit to a Panasonic TV (VIERA), which does not incorporate HDAVI Control 3, or other company’s TV, “AUTO ” setting automatically becomes “40 ” (msec).
4. To finish the setting (➔ page 36)
Changing the volume display
You can change the volume display from dB value to numeric value.
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “VOL MODE ”, and press [OK] to confirm.
3.Press [e][r] to select the display, and
press [OK] to confirm.
Numeric value display: This mode displays the sound volume value in number from 0 to 50. (Factory setting: 16 )
dB value display: This mode displays the sound volume value in dB value. (Factory setting: – 48dB )
Factory setting: dB value display
4. To finish the setting (➔ page 36)
Note
•When you change the volume display, the sound volume returns to the factory setting.
Reset (factory settings)
The operation settings for the unit will be initialised to the settings made at the time of shipment.
1.To enter the SETUP (➔ page 36)
2.Press [e][r] to select “RESET ”, and press [OK] to confirm.
3.Press [e][r] to select “YES ”, and press
[OK] to confirm.
YES : Choice for resetting
NO : Choice against resetting
•To cancel, select “NO ”. Factory setting: NO
Note
• When you select “YES ”, the input is switched to “FM ”.
4. To finish the setting (➔ page 36)
40
RQT9223