Error messages
| Message | Cause/countermeasure | |
|
|
| |
1 | U701 | The equipment connected by the HDMI cable is not compatible with the unit’s copyright | |
protection technology. | |||
|
| ||
|
|
| |
|
| Should anything unusual happen using an HDMI connection: | |
|
| Consult your dealer if the sign remains on the display after these steps. | |
2 | U703 | • Turn the connected equipment off and on again. | |
• Pull out the HDMI cable then reinsert it. | |||
|
| ||
|
| • Reduce the number of equipment connected in series to the HDMI terminal if exceeding 2 | |
|
| units. | |
|
|
| |
3 | U704 | The unit has received a signal for a picture format that is incompatible with the HDMI connection. | |
Check the settings of the connected equipment. | |||
|
| ||
|
|
| |
4 | REMOTE 1 |
| |
or | Match the modes on the main unit and the remote control. | ||
| REMOTE 2 |
| |
|
|
| |
5 | CANCEL MUTING | Muting is on. | |
FUNCTION | Press [MUTING] on the remote control to cancel the function (➔ page 31). | ||
| |||
|
|
| |
6 | NO C AND LS/RS | Center and surround speakers are set as absent. Change their setting to present (➔ page 37). | |
SPEAKERS | |||
|
| ||
|
|
| |
7 | NO LS/RS | Surround speakers are set as absent. Change their setting to present (➔ page 37). | |
SPEAKERS | |||
|
|
8NO LS/RS AND SBL/ Surround and surround back speakers are set as absent. Change their setting to present
SBR SPEAKERS (➔ page 37).
9 | NO SBL/SBR | Surround back speakers are set as absent. Change their setting to present (➔ page 37). | |
SPEAKERS | |||
|
| ||
|
|
| |
10 | NOT POSSIBLE FOR | You are trying to use the effect unavailable for analog | |
| ANALOG 8CH INPUT |
| |
|
|
| |
11 | NOT POSSIBLE FOR | You are trying to use the effect unavailable for the current input source. | |
| THIS INPUT SOURCE |
| |
|
|
| |
12 | PCM FIX | The unit is in the “PCM FIX” mode. Cancel this mode (➔ page 39). | |
| (flashing) |
|
13SELECT SPEAKER A “SPEAKERS A” is off. Select “SPEAKERS A” (➔ page 26).
14 | SPEAKERS ARE OFF | “SPEAKERS A” and “SPEAKERS B” are off. Select “SPEAKERS A” or “SPEAKERS B” | |
(➔ pages 26 and 27). | |||
|
| ||
|
|
| |
15 | NOT SUPPORT FOR |
| |
THIS WIRELESS | Not compatible with this wireless system (➔ page 23). | ||
| SYSTEM |
|
Glossary / Error messages Reference
53
RQT9223