ACCESSORIES |
| BOBBIN WINDING |
|
|
|
Foot Pedal | AC/DC Adapter | Bobbins (x2), |
|
| Thread Spools (x2), Needle, |
|
| Needle Threader |
BATTERY INSTALLATION
1.Battery compartment is on the bottom of the sewing machine.
2.Open the cover of the battery compartment and insert the 4 “AA” alkaline batteries. Make sure that the batteries are in the correct position as marked on the inside of the battery compartment.
3.Replace the battery compartment cover. Caution: Make sure that the On/Off Button is in the “Off” position when inserting or changing the batteries. If the On/Off button is in the “On” position when inserting or changing the batteries, the sewing machine may run suddenly.
Needle Bar
THREADING UPPER THREAD
⑥②
①
④
③
⑦⑤
⑧
⑨
Caution: When threading the sewing machine, make sure that the On/Off button is in the “Off” position.
1.Place the spool of thread into the spool pin.
2.Thread the machine following this sequence: ①, ②, ③, ④, ⑤, ⑥, ⑦, ⑧, k.
Thread Clamper
To wind your bobbins:
1.Press on the bobbin winder lever to raise the bobbin winding pin.
2.Place an empty bobbin on the bobbin winding pin.
3.Place a spool of thread on the spool pin spindle.
4.Take the end of the thread from the thread spool and wind it counter clockwise around the upper section of the thread clamper following the numbered sequence in the illustration above.
5.Continue taking the thread around the needle bar.
6.Wrap the thread counter clockwise around the empty bobbin several times.
7.Press the bobbin winder button and run until the bobbin is full.
8.When the bobbin is full, release the bobbin winder button and remove the bobbin from the bobbin winding pin.
9.Lift the bobbin winding lever to lower the bobbin winding pin.
3 | 8 |
